Turtlerock Forum

Got a for more items on the go here:

There are higher res pictures here along with some more shots:
http://s12.photobucket.com/user/deskman/library/FS1

SSL 502's and 505's:
The SL502 is a 4-band semi parametric EQ module.
The SL505 is a dual line input module with input level control, HPF and LPF, insert point and output control.
The best way to rack these up would be to have your balanced line I/O feeding the SL505 with the unbalanced SL502 on the insert point of the SL505.
This way you would have balanced I/O, input and output control, filters and a 4 band eq.
$300 for a 505/502 pair or $500 takes the lot.


Road Ready 3RU road case: << ON HOLD
This unit is super solid and has rack rail on the front and the back
Good condition and fairly new/unsused.
$100


DSE Pre/Eq:
Simple pre/eq which can run off battery or external PSU
$10


Yamaha CDR1000:
This is a professional rackmount CD player/recorder.
It has s/pdif and AES/EBU I/O along with balanced analogue.
It also features Apogee UV22 Dither
$150

RCA BE-100 EQ modules in channel:
Simple EQ module in channel including an RCA opamp card and painton fader
See more pictures link for inside of the channel. I have two of these
Also see this link for some more info regarding these: http://www.preservationsound.com/?p=51
$150 each


ADM 1540 EQ modules including card connector:
These are the ones Greg was selling a while back, I never got around to racking them.
$300 for the pair


Sony MXP3000 Channel EQ's:
These are from an MXP 3000 console.
They have an unbalanced i/o and require +/- 15v.
I have the schematics and pinouts for these too.
$60 each (4 semi parametric, 4 dual concentric parametric, 1 graphic)
or $500 takes the lot - some of them might need some re-capping etc.

updated.

Peat..could I take the sans amp please ?

Cheers

sansamp and one pair of SSL's on hold.

Very much open to offers here.

lowered asking prices

Pmed on 4 dual concentric parametrics

on ebay now:
http://www.ebay.com.au/sch/phmelectroni ... pg=&_from=

PM'd