here is a weird one
i have a 4.1 mac pro with a faulty backplane
thats right… logic board and cores are all totally fine (i have taken out and tested in another machine)
so the expensive part of the computer is good to go
to replace the backplane is next to impossible (and expensive)
but if anyone has a DEAD 4.1 build mac (dead logic board/ processors/ PSU/ anything) thats all i need..
basically just the shell (and the circuit board that is in it)
and all my working bits can slot in and work again..
longshot
but if someone has it ill pay decent money
i only ask cause i have a 3.1 shell here - cause i saved it for exactly these kind of reasons… but now I'm onto 4.1 machines and i can't use that one.
make someone some easy money for something they never thought they would use again..
- It is currently Wed Jul 29, 2026 11:23 pm • All times are UTC + 10 hours [ DST ]
WTB: 4.1 build mac pro NOT WORKING
Moderators: rick, Mark Bassett
6 posts
• Page 1 of 1
WTB: 4.1 build mac pro NOT WORKING
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet productions:presents:recordings
- gigpiglet
- Valued Contributor

- Posts: 1153
- Joined: Tue Jun 01, 2010 4:10 pm
- Location: sydney australia
Re: WTB: 4.1 build mac pro NOT WORKING
have you spoken to apple about getting them to replace the backplane?... i had it done recently and it didn't cost as much as you might think
Dave Graham
melbourne
melbourne
- mistersully
- Registered User

- Posts: 40
- Joined: Thu Mar 24, 2011 8:31 am
Re: WTB: 4.1 build mac pro NOT WORKING
i got the quote… it was 600$
which for a 1200 computer (market price) is not something id spend
id rather buy another machine and have a spare CPU
or find a dead logic board machine (much more common) and drop my working one in it..
which for a 1200 computer (market price) is not something id spend
id rather buy another machine and have a spare CPU
or find a dead logic board machine (much more common) and drop my working one in it..
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet productions:presents:recordings
- gigpiglet
- Valued Contributor

- Posts: 1153
- Joined: Tue Jun 01, 2010 4:10 pm
- Location: sydney australia
Re: WTB: 4.1 build mac pro NOT WORKING
that's odd... i had my backplane replaced and some other stuff as well... and it was around $450
Dave Graham
melbourne
melbourne
- mistersully
- Registered User

- Posts: 40
- Joined: Thu Mar 24, 2011 8:31 am
Re: WTB: 4.1 build mac pro NOT WORKING
interesting.. where was that?
i don't use apple centres (after some terrible experiences over the years. once LOSING a computer, once returning the wrong machine, and one brand new laptop returned three times before i insisted on a new machine)
but if the pricing is that low id consider it..
i don't use apple centres (after some terrible experiences over the years. once LOSING a computer, once returning the wrong machine, and one brand new laptop returned three times before i insisted on a new machine)
but if the pricing is that low id consider it..
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet productions:presents:recordings
- gigpiglet
- Valued Contributor

- Posts: 1153
- Joined: Tue Jun 01, 2010 4:10 pm
- Location: sydney australia
Re: WTB: 4.1 build mac pro NOT WORKING
scrap that
i got a bottom of the range quad core 4.1 on ebay for 800 bucks delivered
ill pull my top specced processor board out of the dead machine and whip it in
along with the extra ram
and gives me an extra hard drive
and spare video card
and for that matter a spare "emergency" (low specced) processor.
will have my 3.1 build machine up for sale shortly
i got a bottom of the range quad core 4.1 on ebay for 800 bucks delivered
ill pull my top specced processor board out of the dead machine and whip it in
along with the extra ram
and gives me an extra hard drive
and spare video card
and for that matter a spare "emergency" (low specced) processor.
will have my 3.1 build machine up for sale shortly
Gareth Stuckey
gigpiglet productions:presents:recordings
gigpiglet productions:presents:recordings
- gigpiglet
- Valued Contributor

- Posts: 1153
- Joined: Tue Jun 01, 2010 4:10 pm
- Location: sydney australia
6 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 15 guests