stuff for the DIYer from budding to experienced.
Posted: Thu Jul 31, 2014 5:41 pmElectrodyne panel for an 8 channel mixer. This thing is sweet! there are 8 volume pots with a chrome levered switch under each pot to select L/C/R output buss, master volume control, monitor volume control AND a switched 2 channel 2 band passive eq with big beautiful meters all in 3ru. Yes, it's just the panel and the eq filter stage, you will need to build (or have built) a summing stage and eq gain stage behind it a long with vu buffer and monitor outs etc but this is definitely possible with all the kits etc out there or get someone like Rob Squire to build you one. Make some good offers over 300, the vu meters, eq and knobs are worth that at least…
PM700 channel strips. This was my first racking project and I used it for years, funky 3 band gyrator eq, transformer preamp and I added a transformer output stage and phantom power too. Well I cannibalised it for parts awhile back so there's no power supply anymore and I've lost the lid. It's an elgee case though and they sell individual parts for the cases so that can be replaced and a jlm 3 rail power supply and a bit of a fiddle and you'll be up and running. Can't say it compares to my neves but it is the guitar and bass sounds on several very highly regarded albums. How's 100 for someone to play with and get their tech skills up?
PCB for a PRR176 valve/solidstate hybrid varimu. Totally intended to build this but know that I won't now. I did have own one of the original PRR versions which this grew out of and it was a great box this has loads of improvements and will be a great unit. for more info look over on GroupDIY. $50.
PM700 channel strips. This was my first racking project and I used it for years, funky 3 band gyrator eq, transformer preamp and I added a transformer output stage and phantom power too. Well I cannibalised it for parts awhile back so there's no power supply anymore and I've lost the lid. It's an elgee case though and they sell individual parts for the cases so that can be replaced and a jlm 3 rail power supply and a bit of a fiddle and you'll be up and running. Can't say it compares to my neves but it is the guitar and bass sounds on several very highly regarded albums. How's 100 for someone to play with and get their tech skills up?
PCB for a PRR176 valve/solidstate hybrid varimu. Totally intended to build this but know that I won't now. I did have own one of the original PRR versions which this grew out of and it was a great box this has loads of improvements and will be a great unit. for more info look over on GroupDIY. $50.