FS: isoboxes and splitters
Posted: Tue Oct 14, 2014 4:31 pmHi TRockers…
I've slowly been turning my stash of parts, modules and what have you into useful things and these are the current crop. 2 channels of 1 in, 2 out transformer based splitters/isobox/balancers in full steel boxes. 1 direct out and 1 transformer isolated split that can be used with line level gear or mics to send one source to two separate places with full transformer isolation. Can also be used to balance the output of unbalanced gear like RNC comps or similar. Currently the transformer output is fully floating but I can add a ground switch for an additional $20 or it can be modded with a switch to make it a 1 in, 3 out splitter. The transformers are 1:1 ferguson transformers harvested from ABC broadcast gear. Nifty little tool for stage or studio I've got 5 left at $115 each.
I've slowly been turning my stash of parts, modules and what have you into useful things and these are the current crop. 2 channels of 1 in, 2 out transformer based splitters/isobox/balancers in full steel boxes. 1 direct out and 1 transformer isolated split that can be used with line level gear or mics to send one source to two separate places with full transformer isolation. Can also be used to balance the output of unbalanced gear like RNC comps or similar. Currently the transformer output is fully floating but I can add a ground switch for an additional $20 or it can be modded with a switch to make it a 1 in, 3 out splitter. The transformers are 1:1 ferguson transformers harvested from ABC broadcast gear. Nifty little tool for stage or studio I've got 5 left at $115 each.