Page 1 of 1
003 ADAT
Posted:
Tue Feb 09, 2010 6:24 pmby thephil
Ok so it looks like my ADAT in on my 003 has left me for greener pastures.
003 is out of warranty so my question is, who do I send it to for a possible repair? Obviously repairing is going to be cheaper than replacing the whole unit!?
Anyone have any tips or recommendations
:(
Posted:
Tue Feb 09, 2010 6:54 pmby 13thbeach
Send it to those black lion guys and get it all updated ....oh and see if they can fix your problem at the same time.
Posted:
Tue Feb 09, 2010 7:07 pmby thephil
interesting...anyone heard a mod?
Posted:
Tue Feb 09, 2010 7:32 pmby 13thbeach
Sorry, heard about it but never actually heard one. Good reports however. I think you'd need to send it to the US though.
Posted:
Tue Feb 09, 2010 9:26 pmby jithknot
if you go to the blacklion website, they compare the digi converters with the mods, and you can definitely hear an audible difference.
as for the mod i think its around 700 us plus shipping, dno if the prices have changed.
Posted:
Wed Feb 10, 2010 12:27 amby Kurt
Yoy
can hear a difference or you
think you can because you've been told there is a difference? ;)
jithknot wrote:if you go to the blacklion website, they compare the digi converters with the mods, and you can definitely hear an audible difference.
as for the mod i think its around 700 us plus shipping, dno if the prices have changed.
Posted:
Wed Feb 10, 2010 5:15 amby jithknot
Kurt wrote:Yoy
can hear a difference or you
think you can because you've been told there is a difference? ;)
jithknot wrote:if you go to the blacklion website, they compare the digi converters with the mods, and you can definitely hear an audible difference.
as for the mod i think its around 700 us plus shipping, dno if the prices have changed.
haha too much Ethan Weiner i presume??lol
nah, chek it out yourself, anyone can notice the difference.
doesnt take much to understand that 003 converters sound, ummmm 'different'
haha
Posted:
Wed Feb 10, 2010 6:57 amby thephil
emailed them and they cant do the ADAT repair.....however I am traveling to the states in April....anyway back to the question?
Adat repair anyone?
Posted:
Wed Feb 10, 2010 7:34 amby rick
open it up find the ribbon jumper cable that goes to the adat port unplug it , and plug it back in , (give it a clean if you have something suitable)
if that works send me something ,
if it doesnt thats all the service its ever going to get .
it fixed one of mine at least
Posted:
Wed Feb 10, 2010 3:48 pmby thephil
no dice...its just soldered onto the board so there are no ribbons to clean....found a mob in Melbourne that do digi repairs so it looks like i will be without for a couple of weeks...
Posted:
Wed Feb 10, 2010 6:01 pmby rick
are you sure , the one i fixed was a ribben header of somekind , may it was a 002 but definately fixed the not adat light ..
err that is do you have a light ..?