- It is currently Wed Jul 29, 2026 4:32 am • All times are UTC + 10 hours [ DST ]
Rick PLZ tell us about the WEISS/MAYA
Moderators: rick, Mark Bassett
45 posts
• Page 1 of 2 • 1, 2
Rick PLZ tell us about the WEISS/MAYA
Like the subject says we would all love to know :D
- walding
- Frequent Contributor

- Posts: 709
- Joined: Sat Oct 29, 2005 5:43 pm
hey its just the highest end converter ever built
it was on show at the integrate 09 trade show
the sound makes me smile every time i turn it on
it makes me laugh when ever i look at it
there are 10 world wide i think , mine is serial no 4
i am using it for audiophile type highend releases , its kinda magic
enough ..?
it was on show at the integrate 09 trade show
the sound makes me smile every time i turn it on
it makes me laugh when ever i look at it
there are 10 world wide i think , mine is serial no 4
i am using it for audiophile type highend releases , its kinda magic
enough ..?
Last edited by rick on Fri Aug 28, 2009 11:23 pm, edited 1 time in total.
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
hey i might be looking a bit mean here with the details ,
but i dont actually spend too much time on my own forum
telling you why you should be mastering with us .
so maybe i should change my unwritten policy ..?
the weiss/ maya box is why you should be using us :)
but i dont actually spend too much time on my own forum
telling you why you should be mastering with us .
so maybe i should change my unwritten policy ..?
the weiss/ maya box is why you should be using us :)
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
WEISS/MAYA CONVERTORS:
"When you're sick and tired explaining gear choices to clients"
you can tell em there's 10 of something in the world, and to shut the f@#$ up!
thats all we need to know about em right??
"When you're sick and tired explaining gear choices to clients"
you can tell em there's 10 of something in the world, and to shut the f@#$ up!
thats all we need to know about em right??
Jamil Khuri
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
- jkhuri44
- Forum Veteran

- Posts: 2537
- Joined: Wed Sep 20, 2006 10:53 pm
- Location: Dundas
rick wrote:hey its just the highest end converter ever built
it was on show at the integrate 09 trade show
the sound makes me smile every time i turn it on
it makes me laugh when ever i look at it
there are 10 world wide i think , mine is serial no 4
i am using it for audiophile type highend releases , its kinda magic
enough ..?
Hi Rick, I am frantically trying to get my wife to help me record a few more songs with me so I can see it in person...but, it is a DA converter isn't it? So, do you just use it for listening? When I say "just" I mean, does it do other stuff too?
Gian Parodi
It's the first watt that counts
It's the first watt that counts
- Gian
- Frequent Contributor

- Posts: 516
- Joined: Tue Nov 18, 2008 9:38 pm
- Location: Sydney, Australia
I reckon it's got some sort of super conduting cryogenic shit going on inside it. But more than likely I'm probably wrong, would Rick tell us if I was right? Probably not. :)
Last edited by heathen on Thu Sep 03, 2009 2:32 pm, edited 1 time in total.
Heath Smith
-

heathen - Valued Contributor

- Posts: 1745
- Joined: Sun May 08, 2005 11:15 pm
- Location: Sydney
Gian wrote:When I say "just" I mean, does it do other stuff too?
I hear it makes a mean espresso.
Troy Nababan
A VERY handsome sound guy.
A VERY handsome sound guy.
- spandex man
- Registered User

- Posts: 69
- Joined: Fri Jun 27, 2008 3:25 am
-

Mark Bassett - Forum Admin

- Posts: 540
- Joined: Fri May 06, 2005 6:15 pm
Out of interest, Rick, what were you using prior to that TARDIS thingy?
I also had a great smile one my face when I upgraded my conversion from MOTU to Apogee, so I sort of know what you mean in a humbly lesser sort of way.
I also had a great smile one my face when I upgraded my conversion from MOTU to Apogee, so I sort of know what you mean in a humbly lesser sort of way.
Chris Preston
The man who gives meaning to the word "amateur"
The man who gives meaning to the word "amateur"
-

chris p - Frequent Contributor

- Posts: 882
- Joined: Tue May 10, 2005 6:15 pm
- Location: Sydney, NSW
Squeezy...
Sorry another one to squeeze as much info out of you as possible Rick : )
Excuse my ignorance as I learn. Here are some wild guesses....
1. Being a DA convertor (as someone mentioned earlier) the WEISS/MAYA box is used for monitoring only - further illustrating the adage of how critical your listening environment is to the quality of your final product.
2. Again being a DA convertor the WEISS/MAYA box is used for sending final mixes out of a DAW into a hardware based CD mastering system?
3. Both
4. None of the above. Go and sit in the corner...
Excuse my ignorance as I learn. Here are some wild guesses....
1. Being a DA convertor (as someone mentioned earlier) the WEISS/MAYA box is used for monitoring only - further illustrating the adage of how critical your listening environment is to the quality of your final product.
2. Again being a DA convertor the WEISS/MAYA box is used for sending final mixes out of a DAW into a hardware based CD mastering system?
3. Both
4. None of the above. Go and sit in the corner...
-

DwaneHollands - Frequent Contributor

- Posts: 577
- Joined: Fri Jul 10, 2009 2:03 pm
- Location: Palmerston NT
I Think I found a Link finally!
I searched a while ago to find the OEM with no results...Until today....
http://www.weiss-highend.ch/medea/index.html
Is this the beast?
EDIT: Actually it says Medea, so perhaps not the same thing....
http://www.weiss-highend.ch/medea/index.html
Is this the beast?
EDIT: Actually it says Medea, so perhaps not the same thing....
-

DwaneHollands - Frequent Contributor

- Posts: 577
- Joined: Fri Jul 10, 2009 2:03 pm
- Location: Palmerston NT
Re: I Think I found a Link finally!
DwaneHollands wrote:I searched a while ago to find the OEM with no results...Until today....
http://www.weiss-highend.ch/medea/index.html
Is this the beast?
EDIT: Actually it says Medea, so perhaps not the same thing....
nah the medea is only a 16th of what the dac i have is
here is a photo again

Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
-

DwaneHollands - Frequent Contributor

- Posts: 577
- Joined: Fri Jul 10, 2009 2:03 pm
- Location: Palmerston NT
It's a feel good machine. Me thinks it might have something to do with avoiding the "nasties" caused by the frequency limitation of the 44.1 standard of CD audio format.....and possibly adding some of the sweetness that is missing when we do not get the extended bandwidth above the threshold of normal human hearing. You know......? The stuff Mr Neve was talking about in an early edition of AT about how research has shown while we can not "hear" audio above 20kHz aprox we do perceive it's presence or absence. The studio dog will love you if you get one of these boxes......your accountant will think you're nuts!
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-

Chris H - Forum Veteran

- Posts: 2321
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
yeah.... a big white box - not so amazing for the vibe of a room! for 250k, they could have at least supplied a wooden cupboard for it to come in. or even just finished it in wood grain laminex.....
we have a black and green paisley sheet that does wonders at hiding our TV when we don't want to look at it.
Rick, maybe you could do something similar?
:-)
so - any plans for getting a matching ADC?
we have a black and green paisley sheet that does wonders at hiding our TV when we don't want to look at it.
Rick, maybe you could do something similar?
:-)
so - any plans for getting a matching ADC?
My name is Julian Higginson and I approve of this message.
- no-fi
- Frequent Contributor

- Posts: 515
- Joined: Sat Feb 23, 2008 12:21 pm
- Location: sydney
gee , the reason it is not rack mountable is it weighs about 80 kg ( and the power supply weighs twice that )
and its not white , but sand blasted aluminium ( looks like a neumann mic if you understand ) and the billett aluminum is is 3.5 cm thick ( yes cm not mm !) .
it looks pretty star trek for sure
but i was never a star trekker ,
i made a nice wooden rack for it to sit on for now , and the wheels broke on day one because it was too heavy
its sitting on industrial casters now.
the weiss / mayer rack for it was just out of control in size and dimensions , but it will be at the new studio
there is a bunch of matching stuff coming along that i will feature in the new studio as well , none of it is any lighter or any smaller
just the opposite actually .
i would like to get the whole set when it comes out , but i am sure finances will dictate that i wont
Rick "whey do you make this stuff so heavy ? "
weiss/maya "why is all your other stuff so light? " :)
and its not white , but sand blasted aluminium ( looks like a neumann mic if you understand ) and the billett aluminum is is 3.5 cm thick ( yes cm not mm !) .
it looks pretty star trek for sure
but i was never a star trekker ,
i made a nice wooden rack for it to sit on for now , and the wheels broke on day one because it was too heavy
its sitting on industrial casters now.
the weiss / mayer rack for it was just out of control in size and dimensions , but it will be at the new studio
there is a bunch of matching stuff coming along that i will feature in the new studio as well , none of it is any lighter or any smaller
just the opposite actually .
i would like to get the whole set when it comes out , but i am sure finances will dictate that i wont
Rick "whey do you make this stuff so heavy ? "
weiss/maya "why is all your other stuff so light? " :)
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
I think we went to different schools together
turtlerockmastering.com
we listen
-

rick - Moderator

- Posts: 3486
- Joined: Fri May 06, 2005 8:02 pm
- Location: Sydney
45 posts
• Page 1 of 2 • 1, 2
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 23 guests
