Space Echo replacement heads...

An audio community like no other.

Moderators: rick, Mark Bassett

Space Echo replacement heads...

Postby Virtual Aaron » Fri Sep 08, 2006 2:18 pm

I have a space echo in need of new/reconditioned heads. (30 years of endless tape, I'm surprised they are still even there!)
Has anyone been down this raod?
I can't find any info so I'm guessing that no one sells them.
How viable is head lathing/reconditioning?
Same as an old 1/4" I guess but I've never been there either.
Advice?

Cheers.
Virtual Aaron
Registered User
Registered User
 
Posts: 34
Joined: Tue Sep 27, 2005 2:31 pm
Location: Melbourne

Postby rick » Fri Sep 08, 2006 3:15 pm

perefectly do- able if there is enough "meat" in the heads and your gentle enough

i am find out the hard way that i am not gentle enough to lap heads !

try rens guitar shop in the city ( global vintage i think) i am sure they told me the other day they had a bunch of "broken" space echoes out the back ,so they may have a plan or a contact to fix them or may sell you one with a problem other then the heads

i am sure there is a tech on this board that would lap them if the heads are worth it - anybody want to put thier hand up
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney

Postby Chris H » Fri Sep 08, 2006 4:20 pm

M y guess is that they were a mass produced tape head and if you look on the head the manufacturers name would point you in the right direction to raid some heads from a simmilar era tape recorder of the same name.
Just a long shot but worth a try
User avatar
Chris H
Forum Veteran
Forum Veteran
 
Posts: 2321
Joined: Mon May 09, 2005 11:20 am
Location: Off The Planet

Postby Virtual Aaron » Fri Sep 08, 2006 5:27 pm

I'd prefer not to buy another one because even "as is" space echo's are worth too much. (Although the cost of reconditioing 5 heads is possibly as much? I don't know)
Your idea Chris is rather cunning, definitely appealing to my tight-fisted hard-road-to-save-a-dollar mentality.
I'll look into it.
thanks
Virtual Aaron
Registered User
Registered User
 
Posts: 34
Joined: Tue Sep 27, 2005 2:31 pm
Location: Melbourne

Postby mark rachelle » Sat Sep 09, 2006 12:20 pm

don't do the head re lap yourself unless you are positive you can do it

there is less margin for error the smaller the head so 1/4 " is not easy

maybe practice on some worthless tape machines first

if in doubt and you are in melb

serge at audio does good relaps
or simon tregear is constantly repairing these space echos so hes a good bet too
mark rachelle
Registered User
Registered User
 
Posts: 185
Joined: Sun May 08, 2005 3:27 pm

Postby rick » Sun Sep 10, 2006 3:22 pm

[quote="rick"]perefectly do- able if there is enough "meat" in the heads and your gentle enough

i found d out the hard way that i am not gentle enough to lap heads !

try rens guitar shop in the city ( global vintage i think) i am sure they told me the other day they had a bunch of "broken" space echoes out the back ,so they may have a plan or a contact to fix them or may sell you one with a problem other then the heads

i am sure there is a tech on this board that would lap them if the heads are worth it - anybody want to put thier hand up[/quote]
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney

Postby Virtual Aaron » Sun Sep 10, 2006 5:10 pm

I just had an amp done recently by Simon Tregear, and he's got a few other things of mine on the shelf. He had ten space echo's there as well in the ever growing queue. He is really busy however and I don't think I could burden him any more with another Space Echo.
I wouldn't ever contemplate lapping them myself.
So who is this Serge chap?
Virtual Aaron
Registered User
Registered User
 
Posts: 34
Joined: Tue Sep 27, 2005 2:31 pm
Location: Melbourne


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 23 guests