Mogami W2549 Cable ?

by **HA_DA_JA** » Mon May 26, 2008 10:19 am

Who or where is the best place to buy this in bulk e.g. 328 foot, 646 foot (sorry to use USA terms).
I am always making mic cables and am sick of buying smaller cable untis.
Cheers
Dale

by **TimS** » Mon May 26, 2008 10:51 am

Dale,
I bought about 100ft of Mogami 2524 back in 2004 at $0.46US per foot.
This was the cheapest place I could find it online at the time.
http://www.electroniccity.com/shopping/
All up, it cost me about $70US incl shipping..
I was wiring my guitar rack at the time..
Check them out - they have a good range of Mogami

Otherwise,
If you want them pre-made with neutrik connectors, there is an Ebay store that does them for about 34 bucks.. Puresonics

by **wez** » Mon May 26, 2008 11:10 am

2549 is my choice in cable too, i'd be up for a bulk buy if you want to split a roll.

last time i bought it i think i got it from serge (audio oz), can't remember how much

cheers, wez

by **TimS** » Mon May 26, 2008 11:22 am

I could do with some 2549 as well - need to make up a few different length cables..
Mainly for my lunchbox gear .. although a couple of new mic leads wouldn't go astray..
I'd be up for a share of cable if interested..
Tim..

by **HA_DA_JA** » Mon May 26, 2008 12:44 pm

Do we have a preference of colour if I was to buy this bulk stuff? And what lengths do people want?
I got a price of $3.65 from Australian distributor but minimum of 100 metre roll. I think after a bit of research I can get it for around $3 per metre OS. Is that really worth the trouble?
Cheers
Dale

by **HA_DA_JA** » Mon May 26, 2008 1:03 pm

I think I just answered my own question!

by **jkhuri44** » Mon May 26, 2008 1:53 pm

Puresonics

http://www.puresonics.com.au/default.asp

by **TimS** » Mon May 26, 2008 2:23 pm

jkhuri44 wrote:Puresonics

http://www.puresonics.com.au/default.asp

That's them - they are on Ebay as well...
I have them in my favourites..

However... it probably is cheaper to make your own cables, particularly if custom lengths are required...
If you do the math,
2 x Neutrik connectors (XLR M&F) $14.00 (approx $7.00 each from RS Components)
6m 2529 Mogami cable = $21.95
DIY soldering = free!!
Thats $35.95 per cable.
This doesnt include postage and shipping costs.

Now, if you bought from the US link I posted above costs would be as follows.
20ft (6m) 2529 = $17.60US (20 x $0.88)
2 x neutriks = $3.74 (M XLR) and $4.17 (F XLR) - Gold contacts
Shipping - N/K
Going on parts alone, thats $25.51US..
This doesnt include postage and shipping costs either.

Can pay to buy O/S but depends on how long you need to wait..
Sometimes it just better to buy in Oz and have them quickly..

by **HA_DA_JA** » Mon May 26, 2008 2:24 pm

They are the $3.65 per metre guys!

by **TimS** » Mon May 26, 2008 3:04 pm

by **OzDrum** » Mon May 26, 2008 5:15 pm

TimS wrote:DIY soldering = free!!

depends on if you value your time or not!!
if you work your "time" out at an hourly rate then it is definitely not free!!

by **Kris** » Mon May 26, 2008 5:23 pm

ch ch ch chiiiiiiina.

by **TimS** » Mon May 26, 2008 5:28 pm

OzDrum wrote:
TimS wrote:DIY soldering = free!!

depends on if you value your time or not!!
if you work your "time" out at an hourly rate then it is definitely not free!!

True Geoff, but technicians are even more expensive - so you are still saving money..... just maybe not as much..... well... you know....
;-)

by **TimS** » Mon May 26, 2008 5:31 pm

A tech mate did a quote to make up 4 x 60cm XLR to XLR cables - Klotz cable, Neutrik connectors, 1hr labour and postage = $110+

by **Milo** » Mon May 26, 2008 6:25 pm

Buy your Neutrik connectors from WES: half the price of RS

by **Barney Loveland** » Mon May 26, 2008 7:44 pm

Or try factorysound or Bayview technolgies

by **TimS** » Mon May 26, 2008 10:17 pm

Thanks for the tips guys...
$$ savers..

by **wez** » Tue May 27, 2008 5:02 pm

i can get 150 metres for about $470 inc (that's about $2.85 pm + gst). of course i just realised that you guys are all in sydney which defeats the point a bit, but if anyone in melbourne wants some, i don't need that much.

cheers, wez

by **TimS** » Tue Jun 03, 2008 4:54 pm

jkhuri44 wrote:Puresonics

http://www.puresonics.com.au/default.asp

I just orded a whole bunch of cables from Arvind @ Puresonics for my API lunchbox and some small outboard gear that I have.
Talk about professional. He had them made up, labelled with custom ring colours at no extra charge as well as being super fast and cheap on postage. Even threw in 2 quad core Mogami Neglex mic cables at wholesale price with my other order (which are going on the KM85s)
24hr turn around on custom cables - how awesome is that. Will get them tomorrow.
I even had him make a set of cables that I accidentally got the connectors wrong and he offered to make an adaptor at minimal cost (I got him to make up new cables and will keep th others for future wiring things tho).

If you want quality Mogami cables, with Neutrik connectors at great prices and fast postage - he's the man!!
if not, you can always make your own (like I still sometimes do - I just couldnt be bothered this time around)
Tim..

by **jkhuri44** » Tue Jun 03, 2008 9:00 pm

yeah, arvind's a top bloke..

im returning a mic cable thats making some noise (after a few weeks of using it)...he's fixing it for free, if there's something wrong with it.

great cust. service!

glad that worked out for u tim.

Mogami W2549 Cable ?

Mogami W2549 Cable ?

Colour

Who is online