- It is currently Tue Jul 28, 2026 8:23 am • All times are UTC + 10 hours [ DST ]
Another Listening Session
Moderators: rick, Mark Bassett
71 posts
• Page 2 of 3 • 1, 2, 3
Aearth wrote:A special thanks to Peter for his singing talents and his wonderful love song he dedicated to his bitch Tim.
nIC
You couldnt help yourself, could you!! ;-]
nIC, thanks for a great day (and your wife cooks a super BBQ too) - shame we had to leave so soon.
March '09 will be great - I look forward to it.
Tim..
-

TimS - Valued Contributor

- Posts: 1734
- Joined: Tue May 15, 2007 3:11 pm
- Location: Sydney
Results
I've just been listening to the tracks we did over the weekend and I must say there were no losers as far as equipment is concerned. It's good to see all our fellow Turtles are using some very high and sweet gear, not a B&^$@#?? in sight.
GEAR:
PREAMPS
API 512
Mercury M72
JLM Dual 99v
JLM TG500
JLM NV500
Chandler LTD-1
Vintech Dual 72
Great River MP-2NV
Avedis MA5
MICS
Brauner Valvet
Neumann U87
Neumann U87 with the Innertube mod
Elux ELM 251 (hope I got that right)
SOURCES
male vocal
Acoustic guitar
sorry time slipped away very fast so vocals and acoustic guitar was it.
Like I said every thing sounded good but there were some standouts:
ELM 251; pure cream which made you dribble a bit and wondering how you could come up with $10K to get one.
Great River MP-2NV; just nice on everything.
The rest, well start saving your money boys now you know what you want.
nIC
GEAR:
PREAMPS
API 512
Mercury M72
JLM Dual 99v
JLM TG500
JLM NV500
Chandler LTD-1
Vintech Dual 72
Great River MP-2NV
Avedis MA5
MICS
Brauner Valvet
Neumann U87
Neumann U87 with the Innertube mod
Elux ELM 251 (hope I got that right)
SOURCES
male vocal
Acoustic guitar
sorry time slipped away very fast so vocals and acoustic guitar was it.
Like I said every thing sounded good but there were some standouts:
ELM 251; pure cream which made you dribble a bit and wondering how you could come up with $10K to get one.
Great River MP-2NV; just nice on everything.
The rest, well start saving your money boys now you know what you want.
nIC
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
Re: Results
Aearth wrote:Elux ELM 251 (hope I got that right)
close nic..
its a Soundelux ELUX 251, which used to retail at about USD$5000 - now replaced by the Bock Audio 251 for around about the same price tag
...
....
i want one.
- jeep
Thanks Nic to you and your wife for your hospitality! It was great to meet all who attended and a lot of fun. It perhaps wasn't the most scientific of approaches but definitely my kinda BBQ. I remember hearing "number 7, number 7" several times which seemed to improve the sound of..."number 7". Nothing sounded bad to me and the Soundelux and Inner Tube modded U47 were outstanding! Cheers, Peregrin
- beatmad
- Registered User

- Posts: 83
- Joined: Tue Sep 26, 2006 9:14 pm
- Location: Sydney
I'd just like to say thanks to Nic and his wife for putting on the day and feeding us all. I had a great day and enjoyed meeting everyone.
The only downside is the mic envy i've developed - that 251 was awesome.
Cheers everyone,
Michael
The only downside is the mic envy i've developed - that 251 was awesome.
Cheers everyone,
Michael
- Bent my VU
- Registered User

- Posts: 177
- Joined: Sat May 24, 2008 12:35 pm
- Location: Sydney
Bent my VU wrote:I'd just like to say thanks to Nic and his wife for putting on the day and feeding us all. I had a great day and enjoyed meeting everyone.
The only downside is the mic envy i've developed - that 251 was awesome.
Cheers everyone,
Michael
Yeah it sure is, now I need to work out what I need most a 251 or something else
Last edited by heathen on Sat Mar 23, 2019 1:36 pm, edited 1 time in total.
-

heathen - Valued Contributor

- Posts: 1745
- Joined: Sun May 08, 2005 11:15 pm
- Location: Sydney
Big thanks for Nic and his wife for putting on a great day and an AWESOME BBQ...
I really enjoyed meeting with my fellow audio nerds, its a shame i didnt get to talk to some of you more.
It has also given me the motivation and inspiration to make my podcast happen.
I'll keep you all updated when its closer to happening and I'll be asking you all to submit any ideas you may have to be featured on the yet to be named podcast.
March 09 will be great, we need to start decide how/where its going to work...
- Ry
I really enjoyed meeting with my fellow audio nerds, its a shame i didnt get to talk to some of you more.
It has also given me the motivation and inspiration to make my podcast happen.
I'll keep you all updated when its closer to happening and I'll be asking you all to submit any ideas you may have to be featured on the yet to be named podcast.
March 09 will be great, we need to start decide how/where its going to work...
- Ry
-

Ryan Collings - Registered User

- Posts: 139
- Joined: Tue Aug 19, 2008 1:03 pm
So how did the JLM NV500 and TG500 go on electrics.
I was thinking of building a kit Micro 1290 (NV500) and already have a Dual 99V.
Maybe the API was good on guitars as well??
thoughts?
I built a micro 1290 a while back and miss it in heavy guitar tones. Just wondering if the API or TG are more suitable.
I was thinking of building a kit Micro 1290 (NV500) and already have a Dual 99V.
Maybe the API was good on guitars as well??
thoughts?
I built a micro 1290 a while back and miss it in heavy guitar tones. Just wondering if the API or TG are more suitable.
-

David W - Regular Contributor

- Posts: 268
- Joined: Sat May 07, 2005 8:08 pm
- Location: Wagga Wagga NSW
David W wrote:So how did the JLM NV500 and TG500 go on electrics.
I was thinking of building a kit Micro 1290 (NV500) and already have a Dual 99V.
Maybe the API was good on guitars as well??
thoughts?
I built a micro 1290 a while back and miss it in heavy guitar tones. Just wondering if the API or TG are more suitable.
David if you live in Sydney you can come over and have a listen. I think I will get someone over soon and maybe we can lay some tracks down doing EG.
Ok boys we need to revisit the session again sooner than March...... BBQ is on again, who's in?
This time EG only.
nIC
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
jeep wrote:David W wrote:TimS wrote: I didnt even get my guitar out of its case..
Well that food must have been damn good then.
it sure was.
I think there was cocaine in the bread rolls... Im suffering withdrawals...
-

Ryan Collings - Registered User

- Posts: 139
- Joined: Tue Aug 19, 2008 1:03 pm
Aearth wrote:Ok boys we need to revisit the session again sooner than March...... BBQ is on again, who's in?
This time EG only.
nIC
More bread rolls? I'm in!
-

Ryan Collings - Registered User

- Posts: 139
- Joined: Tue Aug 19, 2008 1:03 pm
More bread rolls.. more cocaine.... more everything..
I should hopefully be ok.....
If I said I have a session, I'd be sweet - but she'll ask how much am I getting paid (she isn't stupid!!)
Unfortunately, I taught her well.. DAMN!!
She knows a Strat from a Tele from an LP..
Well, I'll see how I go, pending a set date..
I should hopefully be ok.....
If I said I have a session, I'd be sweet - but she'll ask how much am I getting paid (she isn't stupid!!)
Unfortunately, I taught her well.. DAMN!!
She knows a Strat from a Tele from an LP..
Well, I'll see how I go, pending a set date..
-

TimS - Valued Contributor

- Posts: 1734
- Joined: Tue May 15, 2007 3:11 pm
- Location: Sydney
Ahhh, this time Tim can serenade me......
;-)
Lock in a date and I'll try to be there. For some traditional guitar sounds let me know if you'd like me to bring a Fender Strat, Gibson Les Paul or a Gretsch Falcon. Tim's got the custom guitars sorted.
Looking forward to another day.
Cheers
Peter
;-)
Lock in a date and I'll try to be there. For some traditional guitar sounds let me know if you'd like me to bring a Fender Strat, Gibson Les Paul or a Gretsch Falcon. Tim's got the custom guitars sorted.
Looking forward to another day.
Cheers
Peter
-

tunetown - Frequent Contributor

- Posts: 929
- Joined: Fri Jan 25, 2008 9:33 am
- Location: Sydney
tunetown wrote:Ahhh, this time Tim can serenade me......
;-)
Lock in a date and I'll try to be there. For some traditional guitar sounds let me know if you'd like me to bring a Fender Strat, Gibson Les Paul or a Gretsch Falcon. Tim's got the custom guitars sorted.
Looking forward to another day.
Cheers
Peter
Don't for get to bring the mics as well.
It's EG day only plus Peter's mics of course.
nIC
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
chris p wrote:Does that mean we can all bring our own guitars? Like my modded to the guts ESP Viper?
Chris is there anything you haven't modded at home. How's your Neve modded electric tooth bush and API hair drier? I hate to think what you've done to your TV or is that the east side wall of your house with running Niagara waterfall (modded of course)
nIC
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
Not all my guitars are custom tho - only one of my strats, but its still a traditionally styled Strat..
It has more of the custom compound radius necks, different neck joint, body chamfer radius is slightly greater than a normal strat..
I have a Tele, super Strat (HB, Floyd Rose, EMG's, etc) and a LP style Epi which has been totally reworked and new pups.
Pete has a lovely LP and Gretsch Falcom - and a beautiful, handmade arch top acoustic.. to die for tones..
:-) SSCCHHHWWWEEEETTTTT
It has more of the custom compound radius necks, different neck joint, body chamfer radius is slightly greater than a normal strat..
I have a Tele, super Strat (HB, Floyd Rose, EMG's, etc) and a LP style Epi which has been totally reworked and new pups.
Pete has a lovely LP and Gretsch Falcom - and a beautiful, handmade arch top acoustic.. to die for tones..
:-) SSCCHHHWWWEEEETTTTT
-

TimS - Valued Contributor

- Posts: 1734
- Joined: Tue May 15, 2007 3:11 pm
- Location: Sydney
TimS wrote:Not all my guitars are custom tho - only one of my strats, but its still a traditionally styled Strat..
It has more of the custom compound radius necks, different neck joint, body chamfer radius is slightly greater than a normal strat..
I have a Tele, super Strat (HB, Floyd Rose, EMG's, etc) and a LP style Epi which has been totally reworked and new pups.
Pete has a lovely LP and Gretsch Falcom - and a beautiful, handmade arch top acoustic.. to die for tones..
:-) SSCCHHHWWWEEEETTTTT
If we can't play them all we cant take some blog pics, I'm going to camcord the session this time.
nIC
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
Aearth wrote:TimS wrote:Not all my guitars are custom tho - only one of my strats, but its still a traditionally styled Strat..
It has more of the custom compound radius necks, different neck joint, body chamfer radius is slightly greater than a normal strat..
I have a Tele, super Strat (HB, Floyd Rose, EMG's, etc) and a LP style Epi which has been totally reworked and new pups.
Pete has a lovely LP and Gretsch Falcom - and a beautiful, handmade arch top acoustic.. to die for tones..
:-) SSCCHHHWWWEEEETTTTT
If we can't play them all we cant take some blog pics, I'm going to camcord the session this time.
nIC
can you send thru some of the pics I took to my email address plz nIC?
Thanks mate,
Tim..
-

TimS - Valued Contributor

- Posts: 1734
- Joined: Tue May 15, 2007 3:11 pm
- Location: Sydney
71 posts
• Page 2 of 3 • 1, 2, 3
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 13 guests