003 ADAT

[thephil]

Ok so it looks like my ADAT in on my 003 has left me for greener pastures.

003 is out of warranty so my question is, who do I send it to for a possible repair? Obviously repairing is going to be cheaper than replacing the whole unit!?

Anyone have any tips or recommendations

:(

[13thbeach]

Send it to those black lion guys and get it all updated ....oh and see if they can fix your problem at the same time.

[thephil]

interesting...anyone heard a mod?

[13thbeach]

Sorry, heard about it but never actually heard one. Good reports however. I think you'd need to send it to the US though.

[jithknot]

if you go to the blacklion website, they compare the digi converters with the mods, and you can definitely hear an audible difference.

as for the mod i think its around 700 us plus shipping, dno if the prices have changed.

[Kurt]

Yoy can hear a difference or you think you can because you've been told there is a difference? ;)

if you go to the blacklion website, they compare the digi converters with the mods, and you can definitely hear an audible difference.

as for the mod i think its around 700 us plus shipping, dno if the prices have changed.

[jithknot]

Yoy can hear a difference or you think you can because you've been told there is a difference? ;)

if you go to the blacklion website, they compare the digi converters with the mods, and you can definitely hear an audible difference.

as for the mod i think its around 700 us plus shipping, dno if the prices have changed.

haha too much Ethan Weiner i presume??lol

nah, chek it out yourself, anyone can notice the difference.

doesnt take much to understand that 003 converters sound, ummmm 'different'
haha

[thephil]

emailed them and they cant do the ADAT repair.....however I am traveling to the states in April....anyway back to the question?

Adat repair anyone?

[rick]

open it up find the ribbon jumper cable that goes to the adat port unplug it , and plug it back in , (give it a clean if you have something suitable)
if that works send me something ,
if it doesnt thats all the service its ever going to get .

it fixed one of mine at least

[thephil]

no dice...its just soldered onto the board so there are no ribbons to clean....found a mob in Melbourne that do digi repairs so it looks like i will be without for a couple of weeks...

[rick]

are you sure , the one i fixed was a ribben header of somekind , may it was a 002 but definately fixed the not adat light ..
err that is do you have a light ..?