- It is currently Tue Jul 28, 2026 10:05 am • All times are UTC + 10 hours [ DST ]
For Sale, A career with A Fast growing Manufacturer
Moderators: rick, Mark Bassett
26 posts
• Page 1 of 1
For Sale, A career with A Fast growing Manufacturer
Hi All, How are you.?
This I thougth would be the perfect place for this type of ad. At BeesNeez Microphones, we are looking for another Full timer... We have been growing over the last few years and it is time for more new blood.
We Currently have 6 permanent staff over the next few months we would like to grow to ten.
We need someone with an ear and great set of hands. the job would intale; moving to Kyogle, Manufacturing microphone Electrics, Recording Microphone Samples and general duties. No experience is necessary, just be willing to learn and enjoy the amazing views and peaceful surroundings of the factory.
We are looking for Full time Applicants, Salary based.
Thanks All
This I thougth would be the perfect place for this type of ad. At BeesNeez Microphones, we are looking for another Full timer... We have been growing over the last few years and it is time for more new blood.
We Currently have 6 permanent staff over the next few months we would like to grow to ten.
We need someone with an ear and great set of hands. the job would intale; moving to Kyogle, Manufacturing microphone Electrics, Recording Microphone Samples and general duties. No experience is necessary, just be willing to learn and enjoy the amazing views and peaceful surroundings of the factory.
We are looking for Full time Applicants, Salary based.
Thanks All
- mics
- Registered User

- Posts: 65
- Joined: Sat Sep 13, 2008 8:05 pm
- Location: Border Ranges NSW
Re: For Sale, A career with A Fast growing Manufacturer
Wow! Great opportunity for someone. Reminds me of when i went to work for Maton in my younger days. These opportunities don't come around very often!
All the best with it Ben.
All the best with it Ben.
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-

Chris H - Forum Veteran

- Posts: 2321
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
Re: For Sale, A career with A Fast growing Manufacturer
Here's your chance Angus.
Mat Robins
Coloursound Recording Studio
Coloursound Recording Studio
-

13thbeach - Frequent Contributor

- Posts: 843
- Joined: Wed May 18, 2005 12:31 pm
- Location: Sunny Altona
Re: For Sale, A career with A Fast growing Manufacturer
prequalizer wrote:Whats the wage?
The wage depends on the person and their requirments. We are looking for a long term commitment and will ensure that the right person will be very well trained and looked after. We even have the necessary trades present to offer a traineeship/apprenticeship in either Electronics or Fitting and Turning if that is appealing.
thanks
- mics
- Registered User

- Posts: 65
- Joined: Sat Sep 13, 2008 8:05 pm
- Location: Border Ranges NSW
Re: For Sale, A career with A Fast growing Manufacturer
prequalizer wrote:Whats the wage?
Lol.. questions like that make me laugh.. You ask that after you've discussed things like how right you are for the job etc.
Another one is, what time is lunch, and what time do i knock off... how many sick days do i get?
Also, high up there.. what day do we get paid?
Awesome oppertunity, and I'd jump at the chance. Sounds like it'd be something I'd relish, having worked as a fitter turner , electrician, & been working as sound guy for last 10 years. But... me and my wife are about to have our first child in approx 4 weeks.
Regards
Mike
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-

Futureman - Frequent Contributor

- Posts: 995
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
Futureman wrote:prequalizer wrote:Whats the wage?
Lol.. questions like that make me laugh.. You ask that after you've discussed things like how right you are for the job etc.
Another one is, what time is lunch, and what time do i knock off... how many sick days do i get?![]()
Also, high up there.. what day do we get paid?
Awesome oppertunity, and I'd jump at the chance. Sounds like it'd be something I'd relish, having worked as a fitter turner , electrician, & been working as sound guy for last 10 years. But... me and my wife are about to have our first child in approx 4 weeks.
Regards
Mike
Mike, feel like a change? THis place sure has alot to offer and i have just last week taken delivery of my new Live tool Turning centre (a machinist dream machine). This puppy can make a K47 blank in 11 minutes.
Kyogle is a great place to raise the fam, you know the air up here's got this special drug in it; i think they call it oxygen lol.
cheers
- mics
- Registered User

- Posts: 65
- Joined: Sat Sep 13, 2008 8:05 pm
- Location: Border Ranges NSW
Re: For Sale, A career with A Fast growing Manufacturer
Wow Ben, great to see your company expanding so quickly, really is impressive. I've got 2 good ears and only 1 good hand, bummer eh. Would really be a great job though and yes all the oxygen up there sure does do wonders for the body and mind I agree.
If you ever in the future need someone doing sales in Sydney or need someone to show off new products to stores in Sydney, hit me up.
If you ever in the future need someone doing sales in Sydney or need someone to show off new products to stores in Sydney, hit me up.
Heath Smith
-

heathen - Valued Contributor

- Posts: 1745
- Joined: Sun May 08, 2005 11:15 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
Ok to spread the word to some peeps on a couple of other aus forums?
Rusty O'Hara
Likes kittens, dislikes the giant ball of fire in the sky and knows for a fact that there is a rabbit in the moon.
Likes kittens, dislikes the giant ball of fire in the sky and knows for a fact that there is a rabbit in the moon.
- RustyO
- Registered User

- Posts: 180
- Joined: Wed Mar 10, 2010 9:52 pm
Re: For Sale, A career with A Fast growing Manufacturer
Please do. thanks
- mics
- Registered User

- Posts: 65
- Joined: Sat Sep 13, 2008 8:05 pm
- Location: Border Ranges NSW
Re: For Sale, A career with A Fast growing Manufacturer
Rusty O'Hara
Likes kittens, dislikes the giant ball of fire in the sky and knows for a fact that there is a rabbit in the moon.
Likes kittens, dislikes the giant ball of fire in the sky and knows for a fact that there is a rabbit in the moon.
- RustyO
- Registered User

- Posts: 180
- Joined: Wed Mar 10, 2010 9:52 pm
Re: For Sale, A career with A Fast growing Manufacturer
mics wrote:Mike, feel like a change? THis place sure has alot to offer and i have just last week taken delivery of my new Live tool Turning centre (a machinist dream machine). This puppy can make a K47 blank in 11 minutes.
Kyogle is a great place to raise the fam, you know the air up here's got this special drug in it; i think they call it oxygen lol.
Trust me, If things were different, and my wife didn't have such a great job and my folks hadn't just moved over from NZ to be close to us & we weren't renovating & baby due.. lol..
It sounds like a great job / lifestyle / change. Someone better pounce on this.
Regards
Mike
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-

Futureman - Frequent Contributor

- Posts: 995
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
prequalizer wrote:Whats the wage?
tact:
/tækt/[takt]
–noun
1. A keen sense of what to say or do to avoid giving offense; skill in dealing with difficult or delicate situations.
2. A keen sense of what is appropriate, tasteful, or aesthetically pleasing; taste; discrimination.
Kristian Anderson
- musikwerks
- Frequent Contributor

- Posts: 713
- Joined: Wed Nov 19, 2008 9:58 am
Re: For Sale, A career with A Fast growing Manufacturer
If you look at seek, clearly they have a wage estimate.
Old school of thought...
- prequalizer
- Registered User

- Posts: 113
- Joined: Thu Feb 26, 2009 11:45 am
Re: For Sale, A career with A Fast growing Manufacturer
prequalizer wrote:If you look at seek, clearly they have a wage estimate.
Yeah, but this ain't "Seek"

ChrisO.....I think. Oh, and F*#K Google, ask me!
-

Ausrock - Frequent Contributor

- Posts: 575
- Joined: Sat May 07, 2005 12:56 am
Re: For Sale, A career with A Fast growing Manufacturer
musikwerks wrote:prequalizer wrote:Whats the wage?
tact:
/tækt/[takt]
–noun
1. A keen sense of what to say or do to avoid giving offense; skill in dealing with difficult or delicate situations.
2. A keen sense of what is appropriate, tasteful, or aesthetically pleasing; taste; discrimination.
Why would you bother doing that? Poor form.
Michael T
- Bent my VU
- Registered User

- Posts: 177
- Joined: Sat May 24, 2008 12:35 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
My reply was poor form?
lol.... riiiiighhhhht.
lol.... riiiiighhhhht.
Kristian Anderson
- musikwerks
- Frequent Contributor

- Posts: 713
- Joined: Wed Nov 19, 2008 9:58 am
Re: For Sale, A career with A Fast growing Manufacturer
Cool opportunity for someone at the right stage of their life.
For what my opinion is worth, I don't think asking for the salary is bad form, but asking on a public forum probably is. The salary is an important piece of information to the employee because it can be the deciding factor between weather someone is willing to do the job or not. Sometimes employers foget that they are being tried out during hiring interview too. I'm certainly not saying you were, Ben, more of a general statement about why in most cases it's perfectly acceptable for a potential employee to ask what the remuneration is (just maybe not in a forum thread!).
Best of luck finding someone, Ben. I could see myself settling down to a life of building microphones in a small town if I was 25-30 years older, not playing in/recording shitty rock bands in the city and partying like it's 1999!
For what my opinion is worth, I don't think asking for the salary is bad form, but asking on a public forum probably is. The salary is an important piece of information to the employee because it can be the deciding factor between weather someone is willing to do the job or not. Sometimes employers foget that they are being tried out during hiring interview too. I'm certainly not saying you were, Ben, more of a general statement about why in most cases it's perfectly acceptable for a potential employee to ask what the remuneration is (just maybe not in a forum thread!).
Best of luck finding someone, Ben. I could see myself settling down to a life of building microphones in a small town if I was 25-30 years older, not playing in/recording shitty rock bands in the city and partying like it's 1999!
Nick Franklin
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
-

waitup - Frequent Contributor

- Posts: 773
- Joined: Fri Jul 31, 2009 3:13 pm
- Location: Sydney, NSW
Re: For Sale, A career with A Fast growing Manufacturer
The ad was placed online in a public forum, therefore I do not know why it would be offensive if the wages were asked. It would be different if there were things said in private with Ben regarding employment opportunities and then it was blabbed online with no reasonable reason.
I find this similar to selling items. What are you selling, a job opportunity. If you do not want to discuss wages, fine, but I do not find it rude that a person asks for wages. If the price is right, I or someone I know may have taken the offer, but by not giving an estimate, makes me think, it's not worth me considering it for myself or someone else.
I see ads online that have "message me for price". Then I find out, the person is giving different prices to different people depending on how gullible they are. Im not saying that it is in this case but some people are very discreet when it comes to wages they offer. I can understand it, if a person finds it rude if someone asks how much they earn, but if a person is offering a job to someone, then they have the right to say, what is the wage.
I find this similar to selling items. What are you selling, a job opportunity. If you do not want to discuss wages, fine, but I do not find it rude that a person asks for wages. If the price is right, I or someone I know may have taken the offer, but by not giving an estimate, makes me think, it's not worth me considering it for myself or someone else.
I see ads online that have "message me for price". Then I find out, the person is giving different prices to different people depending on how gullible they are. Im not saying that it is in this case but some people are very discreet when it comes to wages they offer. I can understand it, if a person finds it rude if someone asks how much they earn, but if a person is offering a job to someone, then they have the right to say, what is the wage.
Old school of thought...
- prequalizer
- Registered User

- Posts: 113
- Joined: Thu Feb 26, 2009 11:45 am
Re: For Sale, A career with A Fast growing Manufacturer
How about "Salary commensurate with experience and skills" That shouldn't offend anyone...
-

Alastair Reynolds - TRM Endorsed

- Posts: 475
- Joined: Mon Dec 04, 2006 1:51 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
prequalizer wrote:The ad was placed online in a public forum, therefore I do not know why it would be offensive if the wages were asked. It would be different if there were things said in private with Ben regarding employment opportunities and then it was blabbed online with no reasonable reason.
I find this similar to selling items. What are you selling, a job opportunity. If you do not want to discuss wages, fine, but I do not find it rude that a person asks for wages. If the price is right, I or someone I know may have taken the offer, but by not giving an estimate, makes me think, it's not worth me considering it for myself or someone else.
I see ads online that have "message me for price". Then I find out, the person is giving different prices to different people depending on how gullible they are. Im not saying that it is in this case but some people are very discreet when it comes to wages they offer. I can understand it, if a person finds it rude if someone asks how much they earn, but if a person is offering a job to someone, then they have the right to say, what is the wage.
I think the wages part would come up during the personal interview between employer and the job applicant based on experience for the job required. Like a prostitute maybe great at her or his job holding a penis for $200 per half hour, but maybe completely incompetent working on a microphone. Both being of a similar shape and holding position I think Ben would pay more for the mic tech. Well Ben's (the employer) choice really.
nIC
Nick Turbin
I'm back
I'm back
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
crikey, $200 per half hour?
-

rob - TRM Endorsed

- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
Re: For Sale, A career with A Fast growing Manufacturer
rob wrote:crikey, $200 per half hour?
I'm only guessing but would you do it for less?
nIC
Nick Turbin
I'm back
I'm back
- Aearth
- Valued Contributor

- Posts: 1156
- Joined: Tue Jun 07, 2005 9:06 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
geez, most of the time i'd do it just to be paid promptly
Last edited by rob on Wed Aug 11, 2010 10:34 am, edited 1 time in total.
-

rob - TRM Endorsed

- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
Re: For Sale, A career with A Fast growing Manufacturer
I dont think its a reasonable question to ask for salary information - its one of the most motivating and important issues when people change jobs.
I've been asked to go to the US to teach next year and apart from many of the boxes that need to be checked before I go, one of them is my my financial situation - salary, super, health insurance, professional indemnity, rent, etc.......
So, I think Mike is quite justified that he should ask for at least a base salary.
At least if Ben is going public on a job offer (like most media) salary is always included in the advert as a salary range e.g $85,000 + super
I've been asked to go to the US to teach next year and apart from many of the boxes that need to be checked before I go, one of them is my my financial situation - salary, super, health insurance, professional indemnity, rent, etc.......
So, I think Mike is quite justified that he should ask for at least a base salary.
At least if Ben is going public on a job offer (like most media) salary is always included in the advert as a salary range e.g $85,000 + super
Tim Spencer
Pressurepoint Studios
Pressurepoint Studios
-

TimS - Valued Contributor

- Posts: 1734
- Joined: Tue May 15, 2007 3:11 pm
- Location: Sydney
Re: For Sale, A career with A Fast growing Manufacturer
True, but as an unqualified factory job I think it's more likely to be somewhat less than half that... And that'd still be more than I'll make this year. If everything was different in my life, I'd be interested.
TimS wrote:At least if Ben is going public on a job offer (like most media) salary is always included in the advert as a salary range e.g $85,000 + super
Kurt Neist
Chief cook and bottle washer - Metalworx
Chief cook and bottle washer - Metalworx
-

Kurt - Valued Contributor

- Posts: 1235
- Joined: Sat May 07, 2005 1:02 am
- Location: Canberra
26 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 16 guests