pultec stereo SP3 all tube line mixer -sold !

This is the place to advertise gear YOU OWN that's for sale, for hire or gear you'd like to own.

Moderators: rick, Mark Bassett

pultec stereo SP3 all tube line mixer -sold !

Postby rick » Fri Apr 01, 2011 1:01 am

as mentioned in another post
i am thinking of selling this thing
its a really rare tube restored and perfect looking and working pultec 7:2 line mixer built in the days where a few panpots was worth making a three unit rack

Rob squire made me an interface box with sowter transformers and vu meters so you feed it 3 pairs of stereo channels on xlrs
plus a mono xlr

and mute each pair plus the mono seperately and keep an eye on the levels .
which make it perfect as an all tube summing mixer for stems which is what i have been using it for in my mastering suite
its not going into the new place because i am trying to have less not more - so its just sitting around

of coarse you could add one of the proharmonic passive mix busses to it and add as many channels as you like for bigger mixes

the pultec is 110 volt
the stems interface box is 240v

it has cost me about 4 grand over time maybe a bit more i dunno i dont want to think about it
i reckon its worth 2 grand to a forum member
lets talk
You do not have the required permissions to view the files attached to this post.
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney

Re: pultec stereo SP3 all tube line mixer

Postby Gian » Fri Apr 01, 2011 3:38 am

That is a very nice unit. And your price is a bargain if you ask me.

======
Not wanting to hijack your thread, but I noticed you mentioned in another post to Myles, that we can't have everything and that at some point we must consolidate and just use the good stuff and stop hoarding everything just coz you can (I'm not quoting you literally, of course)...anyways, I've been thinking the same thing. I've trying to reduce physically the amount of stuff I have, yet be as versatile as I can...I wonder if it is an age thing?
======

Unfortunately, I am not in the market for your tube mixer, but it is a tempting piece.
Gian Parodi
It's the first watt that counts
Gian
Frequent Contributor
Frequent Contributor
 
Posts: 516
Joined: Tue Nov 18, 2008 9:38 pm
Location: Sydney, Australia

Re: pultec stereo SP3 all tube line mixer

Postby rick » Fri Apr 01, 2011 8:58 am

I dont think its an age thing
i have been turning over gear for as long as i have been buying it
i bought this pultec many years ago when i got mastering Stems every day
i set about getting the extra interface made at great
expense years ago as well
both units have long since paid for themselves we hardly use stems any more
and i reckon the price is about right if you take out the " pultec"
mojo factor but sure the pultec vibe is worth alot to the right guy
i will through that in for free:) for a forum member only
chris the tasmanian expressed real interest in it
before i set a price and posted the photo
so i guess he gets first crack at it at this price

Reality for me is i have too many consoles that
will never get used in the new place
one by one you will see them here
i will be turning this pultec into part of a neumann
47 i have my eye on so out it goes
you cannot have everything
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney

Re: pultec stereo SP3 all tube line mixer

Postby The Tasmanian » Fri Apr 01, 2011 1:56 pm

Well - i'm torn with this one
I wish my bank balance was happening..timing is everything....
C h r i z t o w n o
The Tasmanian
Valued Contributor
Valued Contributor
 
Posts: 1901
Joined: Thu Nov 27, 2008 8:04 am
Location: Deep in the woods....

Re: pultec stereo SP3 all tube line mixer

Postby Alastair Reynolds » Fri Apr 01, 2011 5:10 pm

The real trick is getting it in the house without getting caught by the Minister of War and Finance with 20 questions about what is it, why do you "need it" and how much was it :( I already have too much stored at work waiting for the right time to take it home.......
Alastair Reynolds
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
User avatar
Alastair Reynolds
TRM Endorsed
TRM Endorsed
 
Posts: 475
Joined: Mon Dec 04, 2006 1:51 pm
Location: Sydney

Re: pultec stereo SP3 all tube line mixer

Postby Text_Edifice » Sat Apr 02, 2011 12:23 pm

You could sell me those optros Chris so you could buy Rick's pultec so Rick could buy back his U47 - reminds me of the castle
Dave Carter

http://www.twitter.com/davecarter
Text_Edifice
Valued Contributor
Valued Contributor
 
Posts: 1031
Joined: Sun Nov 27, 2005 12:00 pm
Location: Wellington

Re: pultec stereo SP3 all tube line mixer

Postby The Tasmanian » Sat Apr 02, 2011 12:30 pm

Sounds like a good plan.
I'm up for it.
C h r i z t o w n o
The Tasmanian
Valued Contributor
Valued Contributor
 
Posts: 1901
Joined: Thu Nov 27, 2008 8:04 am
Location: Deep in the woods....

Re: pultec stereo SP3 all tube line mixer

Postby DwaneHollands » Sat Apr 02, 2011 3:48 pm

This pultec doesnt have an eq does it? Its just the summing mixer.

I just wanted to check that this isnt a stereo pultec eq with summing. (that would be crazy to get just the eq for 2K)

Because id probably be all over that ;)
Dwane Hollands

Hollands Print Solutions
www.hollands.com.au
User avatar
DwaneHollands
Frequent Contributor
Frequent Contributor
 
Posts: 577
Joined: Fri Jul 10, 2009 2:03 pm
Location: Palmerston NT

Re: pultec stereo SP3 all tube line mixer

Postby rick » Sat Apr 02, 2011 6:31 pm

Just summing dwane its about as basic as a mixer
could be
all tube passive mix buss
looks like an ep1a though:)
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney

Re: pultec stereo SP3 all tube line mixer

Postby Text_Edifice » Sun Apr 03, 2011 11:37 am

pm'd you Chris
Dave Carter

http://www.twitter.com/davecarter
Text_Edifice
Valued Contributor
Valued Contributor
 
Posts: 1031
Joined: Sun Nov 27, 2005 12:00 pm
Location: Wellington

Re: pultec stereo SP3 all tube line mixer

Postby Chinagraf » Sun Apr 03, 2011 5:05 pm

I think there's summing in that for all of us.
User avatar
Chinagraf
Valued Contributor
Valued Contributor
 
Posts: 1608
Joined: Wed Jun 22, 2005 1:09 am
Location: Melbourne

Re: pultec stereo SP3 all tube line mixer

Postby Alastair Reynolds » Mon Apr 04, 2011 8:50 pm

I've got a manual here for the slightly later Solid state version.. must be the one just after yours with new fangled transistor Gain make up stages, but all passive in the mix section. I also found a Pultec catalogue from 1969 with a page about the Tube SP3. Interesting little beast.
Alastair Reynolds
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
User avatar
Alastair Reynolds
TRM Endorsed
TRM Endorsed
 
Posts: 475
Joined: Mon Dec 04, 2006 1:51 pm
Location: Sydney

Re: pultec stereo SP3 all tube line mixer -still here not s

Postby rick » Thu Apr 07, 2011 12:25 am

ok first sale feel through as the buyer got hit with some bills that made buying this impractical
i want to pay somebody else the money that this thing brings
so it is back up for sale $2000
sorry for the confusion
and i also edited out all the inbetweeny summer posts :)
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney

Re: pultec stereo SP3 all tube line mixer -still here not s

Postby Chris H » Thu Apr 07, 2011 10:09 am

Cool!
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
User avatar
Chris H
Forum Veteran
Forum Veteran
 
Posts: 2321
Joined: Mon May 09, 2005 11:20 am
Location: Off The Planet

Re: pultec stereo SP3 all tube line mixer -still here not s

Postby Engininja » Thu Apr 07, 2011 9:22 pm

pm'd you rick
Engininja
Registered User
Registered User
 
Posts: 106
Joined: Fri Jan 15, 2010 12:53 pm

Re: pultec stereo SP3 all tube line mixer -still here not s

Postby rick » Fri Apr 08, 2011 10:25 am

Ok Sold pending payment over the weekend
Rick O'Neil
I think we went to different schools together
turtlerockmastering.com
we listen
User avatar
rick
Moderator
Moderator
 
Posts: 3486
Joined: Fri May 06, 2005 8:02 pm
Location: Sydney


Return to For Sale / For Hire / Gear Wanted

Who is online

Users browsing this forum: No registered users and 22 guests