FS- heaps of guitar stuff, and a little bit of audio gear

[Alistair]

OK- here's a big list. I've got a huge CC bill, rent coming up and an overseas wedding that's appeared out of nowhere, so I need less stuff and a bit of cash. A lot of if it guitar stuff- but there's a bit of audio stuff in there too. There might be some more audio stuff coming up on the list soon, but I'm trying to get rid of some guitars before I sell audio stuff at the moment! Hopefully it won't get that drastic!
I'm in Melbourne, but happy to ship everything.

EDIT- I can never get Trock to recognise my image hosting, so if you wanna see pics, just check this thread- http://www.ausband.com.au/modules.php?name=Forums&file=viewtopic&p=2441465#2441465

Rivera Rake Amp Head
I love this amp, I'd prefer to keep it but such is life.
It's a low gain Rivera amp, Bassman clone on one side, JTM 45 on the other. All the wacky Rivera features (modern/vintage voicing, pentode/triode, NINJA BOOST!). It's running EL34's at the moment, but can also be set up to run 6L6's. Nice sounding but noisy spring reverb (aren't they all!). Comes with the big footswitch. Great condition, but it's done a lot of gigs so has some tolex wear and a small rip in the grille cloth. Sounds great- super lush and dark, or chimey and bright if you want it.
Chasing $1400- they are pretty rare, and for my money the best of the Rivera amps by far.

Terrible Amps Octalpussy
Made by AGGH member Bulldozed in Jan 2010. It's had a very easy life, as I bought it as a practice amp and then somehow ended up with a Fender Champ and Silverface Deluxe. Essentially it's a simplified Fender Deluxe style amp (with twin 6V6's), but running octal preamp tubes. Sounds great, but doesn't have the volume of a Deluxe. I'm no amp wizard, but I imagine some bigger transformers would really get it kicking along! Great to get an overdriven AC/DC type tone at a very low volume, and has a nice dark clean sound up til about midway on the dial. Switchable output impedance (4/8/16), Volume/Treble/Bass
I think I paid about $350 for the amp but I really can't remember. How's $200 sound?

Burkey Flatliner Pro
The best pedal power supply around! 6x 9vDC outputs, 2x 3-12vDC adjustable outputs (for sag or overpowering), and a 9-12v 1a AC output for tube pedals etc. Every single output is isolated, which means you can combine them in different ways. For example, I combined the two 12vDC outputs to provide 24v for a Memory Man, and combined two 9v outputs for higher current to provide more than 300mA of current for an Empress Superdelay. Plus running overdrives, tremolos, a RAT, wahs etc all of the one supply. It's great! But as mentioned, I'm downsizing the board and going to find something smaller and simpler.
It's in perfect condition bar a few very minor scratches from moving it around, and some velcro residue on the bottom.
I can also supply a few power cables to go with it- we can discuss this but I've got quite a collection.
They sell for around $400 here, so looking for $300 ono.

Mad Professor Sky Blue Overdrive
This is one of the original handmade ones, not the newer mass produced line. Perfect condition, with box. I've used it on about 5 gigs, sounds great, it's just not my thing. I don't like too much gain and it's got heaps!
$180

Fender 12" driver
Came out of a Fender Champ 12- I replaced it with a Jensen C12. Honestly, this speaker will probably go down in history as cheap junk, but it sounds ok! $30

Adams A7 panels
A while ago I bought a pair of Adams A7 with slightly different serial numbers and mismatching panels, with slightly different gain levels- very hard to match up. I ended up just buying two new panels so they matched. It was impossible to find these older style ones, so I'm thinking maybe someone needs a replacement to match theirs! It's worth noting that whilst the new panels can be installed in older monitors, you can't have one of each. The new panels go up to 0dB, whilst the others go up to +6dB, and this is actually wired into the attenuator. $10 each- pick the style that matches your monitors! (photos at bottom)

Bunch of Gibson L5/L4 pickguards
I had these cut for my old Gibson (same size as L5). They are thin, crappy plastic and wouldn't support the pickup I was trying to mount. You want em, they are yours. 2 are black/white/black etc, 1 is just black.

Tusq 4mm Black/mother of pearl bridge pins
New in pack. Not much else to say! $10


Payment in bank deposit/cash etc. Happy to take paypal if you're happy to pay the fees!
Will be more stuff as I find more stuff to sell!

[Alistair]

Some stuff added.

[Alistair]

A few prices dropped etc.

[Alistair]

RE Cab and RNC sold.