http://www.highendcable.co.uk/Nordost%2 ... 0Cords.htm
I wonder if it will help my hot water jug?
- It is currently Mon Jul 27, 2026 2:52 am • All times are UTC + 10 hours [ DST ]
Power Cord
Moderators: rick, Mark Bassett
9 posts
• Page 1 of 1
Power Cord
Mike de Vrees
Purveyor of old stuff
Purveyor of old stuff
-

Futureman - Frequent Contributor

- Posts: 995
- Joined: Wed Mar 19, 2008 4:47 pm
- Location: Sydney
Re: Power Cord
Only if you are boiling oxygen free water.
Bob Charman - Stockport Sound, SA
The Road Goes On Forever and the Party Never Ends..........
The Road Goes On Forever and the Party Never Ends..........
-

stosostu - Regular Contributor

- Posts: 458
- Joined: Fri Jul 23, 2010 3:17 pm
- Location: Clare and Gilbert Valleys, South Australia
Re: Power Cord
The write-up suggests the power will get to your gear FASTER though that cable... So that's got to be good right? 

Nick Franklin
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
Record Producer: http://www.nickfranklin.net
Custom Built Audio Electronics: http://www.nfaudio.com
-

waitup - Frequent Contributor

- Posts: 773
- Joined: Fri Jul 31, 2009 3:13 pm
- Location: Sydney, NSW
Re: Power Cord
waitup wrote:The write-up suggests the power will get to your gear FASTER though that cable... So that's got to be good right?
Does that mean it will boil the water in my kettle faster? Cus that could really work out for me and make it worth every cent.
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: Power Cord
You could achieve the same thing by using a shorter cable. 

Bob Charman - Stockport Sound, SA
The Road Goes On Forever and the Party Never Ends..........
The Road Goes On Forever and the Party Never Ends..........
-

stosostu - Regular Contributor

- Posts: 458
- Joined: Fri Jul 23, 2010 3:17 pm
- Location: Clare and Gilbert Valleys, South Australia
Re: Power Cord
I was sold until I saw 99.99999%, I was really after something more pure!!!!
So many holes to pick I don't know where to start.
So many holes to pick I don't know where to start.

Barney Loveland
- Barney Loveland
- Frequent Contributor

- Posts: 523
- Joined: Mon May 09, 2005 5:28 pm
- Location: Melbourne
Re: Power Cord
I was mildly intrigued, so I googled and found a review.
Presented without comment:
http://www.theaudiobeat.com/equipment/nordost_odin.htm
Presented without comment:
http://www.theaudiobeat.com/equipment/nordost_odin.htm
Manning Bartlett, Studio Laughing Duck, Glenorie NSW
http://www.studiolaughingduck.com
http://www.studiolaughingduck.com
-

Manning - Valued Contributor

- Posts: 1102
- Joined: Wed Sep 28, 2011 6:47 pm
- Location: Glenorie NSW
Re: Power Cord
I always wonder how the "New improved Super Cable" gets around the fact that it's plugging into the crappy old socket on the wall with aging wiring going through a worn out circuit breaker, RCD safety switch and a trembler fuse on the Supply pole then there's the twisted aluminium cable in the supply grid and the corroded connectors into the overstressed transformer on the corner etc etc.
But that last 3 feet from the wall socket to the IEC plug is really good and achieves 68% of light speed.....
My Andrews 2" hollow core Coax on the transmitter is faster than that, bit fiddly to terminate though.
May look a bit odd bringing it back down to an RCA socket for the audio interconnects, but it is good for 50,000 watts continuous at 1MHz into 50 ohms
But that last 3 feet from the wall socket to the IEC plug is really good and achieves 68% of light speed.....
My Andrews 2" hollow core Coax on the transmitter is faster than that, bit fiddly to terminate though.
May look a bit odd bringing it back down to an RCA socket for the audio interconnects, but it is good for 50,000 watts continuous at 1MHz into 50 ohms

Alastair Reynolds
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
-

Alastair Reynolds - TRM Endorsed

- Posts: 475
- Joined: Mon Dec 04, 2006 1:51 pm
- Location: Sydney
Re: Power Cord
.........I thought you meant this type.
You do not have the required permissions to view the files attached to this post.
Chris Hallam.
https://soundcloud.com/hallamsound
Whatever floats your boat.
https://soundcloud.com/hallamsound
Whatever floats your boat.
-

Chris H - Forum Veteran

- Posts: 2321
- Joined: Mon May 09, 2005 11:20 am
- Location: Off The Planet
9 posts
• Page 1 of 1
Return to Inspirational Websites
Who is online
Users browsing this forum: No registered users and 9 guests