FS: NS10s and QSC Powerlight 1.8 *SOLD

[Sheer Noise]

HI guys,

The NS10M are working fine, but just this afternoon when I got them out to test and photograph my 4yo dented the little bubbles on both woofers. [edit] I've tried the vacuum cleaner trick, and it's worked fairly well, but it's not perfect like it was. [/edit] There's also a small dent in one of the tweeter grills, but no damage to tweeter. So annoying. Either way, they're working fine. $600pair.

QSC Powerlight 1.8, very good condition, some rash and bumps here and there, but working 100%. $500

All reasonable offers considered.

Tested today, no hassles. Buyer to organise freight if needed, otherwise pickup from Nth-West Sydney is fine.

[edit]
AND SOME PICTURES:















Dave.

[Sheer Noise]

http://media.qscaudio.com/pdfs/disconti ... s/pl18.pdf

[waitup]

I've had success using a vacuum cleaner to get the dust caps back out.

While I'm at it, do not hesitate to buy from Dave, guys. Real cool guy!

[stosostu]

I've used a vacuum cleaner too, but put it in position THEN switch it on. If you approach the cone with the suction going you could do further damage to the cone by pulling it out or off centre.

[waitup]

I've used a vacuum cleaner too, but put it in position THEN switch it on. If you approach the cone with the suction going you could do further damage to the cone by pulling it out or off centre.

Nice tip

[Sheer Noise]

edit.... vacuum cleaner worked fairly well, but not perfect. Also added some pic's to show condition.

Dave.

[Sheer Noise]

*bump

[Sheer Noise]

and onto eBay:

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 500wt_1413

[Sheer Noise]

SOLD