who does good ribbon mic mods?

by **The Tasmanian** » Fri Apr 27, 2012 9:14 pm

who does good ribbon mic mods?
I need to mod a el cheapo ribbon - dont have the time to do it myself, and would like someone who can re ribbon and install a great transformer.
Also looking for a modded royer copy

by **reddirt** » Sat Apr 28, 2012 9:38 am

I guess your talking in Oz Chris and i've no idea but Michael Joly in the US modded an Apex 205 for me and it's a great cheap mic (new tranny, re-tensioned ribbon etc).
Cheers, Ross

Ross Muir
Alice Springs

by **zenelectro** » Sat Apr 28, 2012 9:53 am

The Tasmanian wrote:who does good ribbon mic mods?
I need to mod a el cheapo ribbon - dont have the time to do it myself, and would like someone who can re ribbon and install a great transformer.
Also looking for a modded royer copy

What mic / replacement ribbon / transformer are you thinking?

cheers

by **Alistair** » Sat Apr 28, 2012 11:41 am

I had a B&O ribbon re-ribboned and rewired by Mark Fouxman in Salt Lake City- it was reasonably easy and cheap to get there (about $30 each way from memory). Very happy with the work, and he is really into ribbon mics- he makes his own from the ground up, including magnets and transformers. The work was pretty reasonably priced.
I would say his transformers are up there and probably better than the standard Lundahl/Carnhill txs that get used.

http://samaraudiodesign.com/Home.html

by **The Tasmanian** » Sat Apr 28, 2012 12:26 pm

Basically looking for 1 or 2 cheap royer copies to purchase that I can get modded to have good transformers / re-ribbon if needed.
Australian modder would be best.

by **The Tasmanian** » Sat Apr 28, 2012 7:02 pm

Thanks Senad
any-one else?
or even any recommendations for good sounding ribbons that dont break the bank?

by **Ben M** » Sat Apr 28, 2012 8:11 pm

Has Glen Phimister crossed your mind at all Chris?
He can re ribbon and should be cool to swap out the tranny.
Could be worth emailing him. Let me know if you don't have it.

cheers

by **The Tasmanian** » Sat Apr 28, 2012 9:15 pm

Thanks Ben - I know Glenn well, and he is one of the people I have in mind.
I sold all my lovely (expensive) ribbons 4038/RCA44/RCA77/Royer's last year.

I'm hoping to find something already worked on first - then if not I can call Glenn.
But I am in a bit of a hurry to record some violin stuff in the next few weeks and was hoping to maybe pick up a modded ribbon or 2 before the session - rather than hire one as I will need it for 2 weeks solid, hence the hire cost would come close to the cost of 1 or 2 cheapish ribbons

There are so many more (el cheapo) ribbons out there these days to choose from.

by **Gian** » Sat Apr 28, 2012 10:09 pm

I am pretty sure Ben sneezby of beesneez can do re-tensioning of the foil and transformer replacements

by **Alistair** » Sun Apr 29, 2012 7:06 pm

As I'm sure you know Chris, the tx swap is pretty easy to do on most of the current Chinese ribbons. Re-ribboning is a little bit trickier.
I've got some CAD ribbons I've been mucking around with, and re-ribboned them with much thinner ribbon (supposedly RCA spec thickness) and it did lift the high end a little bit. I also removed one of the layers of mesh inside the headgrill and that made a much bigger difference. That fixed some of the weird resonances happening in the low mids.
I'm interested in putting some Lundahls in there to see what effect it has.

by **The Tasmanian** » Mon Apr 30, 2012 7:46 pm

Thanks gentlemen - I think I'm sorted now with a modded Royer rip off!

by **danander11** » Mon Apr 30, 2012 9:08 pm

The Tasmanian wrote:Thanks gentlemen - I think I'm sorted now with a modded Royer rip off!

Care to share the info?

by **audioio** » Mon Apr 30, 2012 11:11 pm

The Tasmanian wrote:Thanks gentlemen - I think I'm sorted now with a modded Royer rip off!

Does that mean you don't need mine any more? ;-)

Only kidding. Play with it a bit more if you like.

by **The Tasmanian** » Tue May 01, 2012 12:55 am

David - your stereo Royer is amazing - Ive been using it on tablas for the last 4 days with Bobby Singh and it sounds so good.
Lucas CS4 as an overhead for ambiance
Bobby is a very happy man!
Thank You!!!!

by **jkhuri44** » Tue May 01, 2012 3:36 pm

mmmm tabla...awesome.

by **audioio** » Tue May 01, 2012 10:59 pm

The Tasmanian wrote:David - your stereo Royer is amazing - Ive been using it on tablas for the last 4 days with Bobby Singh and it sounds so good.

I'm very happy to hear that it went well. Just remember, though, mine is pre-Royer... built by Bob Speiden himself (does anyone know if he's still alive?). Although it has been re-ribboned by Royer.

by **Ender** » Sat May 12, 2012 1:22 am

I sent some cheap ribbons to Stephen Sank for mods, which didn't cost too much, and I love them.. I definitely recommend his work. I don't have his contact details handy atm, but I'm pretty sure I tracked him down via the magic of google originally.

by **440Hz** » Sat May 12, 2012 9:49 am

Hi all,

I've not used one of these modded mics from all accounts they seem quite reasonable.

cheers

Nic

#Link removed by admin#

who does good ribbon mic mods?

who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Re: who does good ribbon mic mods?

Who is online