Hey Guys,
A friend has just moved here from NY, and needs someone to change the transformer in his Guitar Amp from 110v to 240v.
Can anyone recommend anyone in the Sydney area?
Thanks,
Smash.
__________________
Simon "Smash" Ashby
- It is currently Wed Jul 29, 2026 7:32 pm • All times are UTC + 10 hours [ DST ]
Need an Amp Tech
Moderators: rick, Mark Bassett
13 posts
• Page 1 of 1
- smash
- Regular Contributor

- Posts: 443
- Joined: Tue Jun 07, 2005 12:49 am
- Location: Northern Beaches, Sydney
Re: Need an Amp Tech
fes at mall music should be close to you.
i used to use duane ledford but i'm not sure if he's doing repair work anymore. he was good though.
i used to use duane ledford but i'm not sure if he's doing repair work anymore. he was good though.
Chr is Bradstre et
- chribble
- Regular Contributor

- Posts: 453
- Joined: Fri Jul 10, 2009 3:50 am
Re: Need an Amp Tech
good timing, im looking for an amptech to fix a broken marshall too 

Jamil Khuri
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
- jkhuri44
- Forum Veteran

- Posts: 2537
- Joined: Wed Sep 20, 2006 10:53 pm
- Location: Dundas
Re: Need an Amp Tech
edit: to be slightly helpful, i've found a bloke in NSW at a place called Rock Dog amps, had a chat, sounds like a good bloke.
Jamil Khuri
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
Amusement & Audio Engineer
"it's not awesome unless its 240bpm with distorted 909 kicks!"
- jkhuri44
- Forum Veteran

- Posts: 2537
- Joined: Wed Sep 20, 2006 10:53 pm
- Location: Dundas
Re: Need an Amp Tech
jkhuri44 wrote:edit: to be slightly helpful, i've found a bloke in NSW at a place called Rock Dog amps, had a chat, sounds like a good bloke.
Rock Dog is a good call but far away from the Northern Beaches.
You could try Stan Holroyd at www.standardampworks.com.au
He's in Epping which is a little closer to you Simon.
Ben Moore
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
Harvest Recordings
Website: http://www.harvestrecordings.com.au
Facebook: http://www.faceback.com/harvestrecordings
-

Ben M - Valued Contributor

- Posts: 1920
- Joined: Fri Jul 04, 2008 11:54 am
- Location: Sydney and Kangaroo Valley, NSW
Re: Need an Amp Tech
Thanks for all the replies guys!
Smash
__________________
Simon "Smash" Ashby
Smash
__________________
Simon "Smash" Ashby
- smash
- Regular Contributor

- Posts: 443
- Joined: Tue Jun 07, 2005 12:49 am
- Location: Northern Beaches, Sydney
Re: Need an Amp Tech
Or you could call one of the techs in the Tech Contact part of the forum
Alastair Reynolds
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
Broadcast Radio Engineer
Master of the Dark Arts (Broadcast)
-

Alastair Reynolds - TRM Endorsed

- Posts: 475
- Joined: Mon Dec 04, 2006 1:51 pm
- Location: Sydney
Re: Need an Amp Tech
chribble wrote:fes at mall music should be close to you.
I second that vote for fes, he's great.
Lee McDonald
"A smart man learns from his mistakes but a wise man learns from other's"
"A smart man learns from his mistakes but a wise man learns from other's"
- Lee
- Regular Contributor

- Posts: 438
- Joined: Fri Feb 25, 2011 11:10 pm
- Location: Northern Beaches, Sydney
Re: Need an Amp Tech
yeah if you want to save money you should retube before the service. that way they cant charge you retail on new tubes. i used to buy a bunch of ax7s in bulk or ecc83/81 or whatever nos off the net rather than paying $20-25 a pop on an eh tube.
Chr is Bradstre et
- chribble
- Regular Contributor

- Posts: 453
- Joined: Fri Jul 10, 2009 3:50 am
Re: Need an Amp Tech
smash wrote:Hey Guys,
A friend has just moved here from NY, and needs someone to change the transformer in his Guitar Amp from 110v to 240v.
Can anyone recommend anyone in the Sydney area?
Thanks,
Smash.
__________________
Simon "Smash" Ashby
There are 3 possibilities,
a) The amps transformer already has 110+110v primaries and can be easily rewired
b) The transformer doesn't have dual primaries and needs to be replaced (bought)
c) If a replacement cant be found it will have to be rewound or another custom made.
I can sort any of these.
Terry Demol
T & L Technical P/L
Audio Design & Service
T & L Technical P/L
Audio Design & Service
- zenelectro
- Registered User

- Posts: 59
- Joined: Mon Jul 19, 2010 1:38 am
- Location: Sydney
Re: Need an Amp Tech
Would highly recommend Glen Lambert all things guitar amp related.
http://members.optusnet.com.au/~glen325/index.html
Cheers
http://members.optusnet.com.au/~glen325/index.html
Cheers
Michael Luchich
Alternation.com.au
Walcha NSW
Alternation.com.au
Walcha NSW
- lonearranger
- Registered User

- Posts: 217
- Joined: Sat Mar 01, 2008 11:13 am
- Location: Walcha NSW
13 posts
• Page 1 of 1
Return to The Turtlerock Forum
Who is online
Users browsing this forum: Baidu [Spider] and 18 guests
