WTB Alesis 9V 4 pin DIN power supply

[Text_Edifice]

Anyone have one of these beasties lying around?

9Vac 20VA with a 4 pin connector aka Alesis Type C

No longer available through Alesis / Numark...

[Text_Edifice]

or a 240v version of the Alesis P4 - these are as used on the Quadraverb / Quadraverb 2 / Wedge / Quadrasynth / etc.

Anyone?

[HA_DA_JA]

I have an Alesis Q2 which also needs a power supply so let me know if 2 people reply.
I also have another Quadreverb which needs a power supply as well.
I thought from memory that digitech also put out a similar power supply for there Quad series EFX but I might be wrong.
Cheers
dale

[Text_Edifice]

According to the Aus distributor Korg make a replacement (KA-165) priced at about $100. Thought I'd see if anyone had one in their box of tricks first.

[HA_DA_JA]

http://www.gumtree.com.au/s-ad/melbourn ... 1004229517

Does this help?

[Hookemeister]

9Vac 20VA with a 4 pin connector aka Alesis Type C

Hi Dave, you could always DIY one if you've got some soldering skills.

If I remember correctly they use a 4 pin Din plug... like a MIDI plug but only 4 pins

If you get stuck, I could knock one up for about $40 plus postage.

Hope this helps

[Hookemeister]

Oops... looks like Dale's got it sorted for you.

[Text_Edifice]

Thought about soldering but I'm not sure how the pins are wired... I'm sure there's a service manual that would have the info.

[HA_DA_JA]

Maybe I can send one down and you can copy it and do a small run?
Cheers
dale

[Text_Edifice]

Dale - was that aimed at me or Greg?