Spring studio storage room cleanout

[Ben M]

Hey everyone

Spring studio storage room cleanout.

Just been doing some early spring cleaning of the studio storage room. Some things have been sitting around since last years spring clean and now everything needs to go. If you see something (or a few things) that takes your fancy send me a PM.

For some of the bulkier items I’m prepared to deliver to Sydney to the inner west area and do pickup from there. This will save you courier or postage costs. I’m in Sydney every few weeks. Otherwise things can be posted to you.
I’ll put some pics up soonish but let me know if you’d like any pics sent to your email.
Some more items will be added when I have some time to go through things.


*Power tran AC-AC 24v 900mA – good power source for some DIY projects…unused $15 ‪http://www.altronics.com.au/index.asp?a ... &id=M9379A

* Shure SM57 – older sm57 has some scratches to the body $60 SOLD

*Sony DAT recorder DTC-60ES. Bought it new and used a few times for transfers. Works great. $90

*3 x Sony ½” reels (10 ½” spool) of digital audio tape for Sony 3324 machine. Spools would fit your ½” tape machine. Tapes are in protective cases with tape on them so they are a bit heavy. If you just want spools then I could run the tape off and send just the spools. Make an offer.

*Nova forge rack. It fits a mixer on the top rack area and then rack space below for outboard. It's has seen no outside use and is in great condition. Fits 9 units horizontally and 6 units vertically with regular 19” wide rack space. SOLD

*16 Unit rack case on big castors. Like new. Still has tag on it. Company is Hardcase. Has metal corners, big castors, double handles etc etc. $190 ono SOLD

*Rare Ronnette Holland R572 dual capsule mic with cable. Circa 1950’s. It is in great cosmetic original condition, one large side screw is missing and there is some light wear, the chrome is in very good condition. Comes with black cast iron base and 5 m cable.
$230

*Old Pearce/Simpson microphone with talkback button, stand and hold on lever. SOLD

*15” Apple Studio Display. Full working condition. Comes with power supply and vga cable SOLD

*Roland SDE 2500 Delay unit – works perfectly $150 SOLD

*Digidesign 882 interface with Digi cable. Make an offer

*22 x Audio Technology mags –Free, postage only SPOKEN FOR
*19 x Sound on Sound mags – Free, postage only SPOKEN FOR

*2 x Digidesign samplecell 2 cards with manuals, cables and sample cds – free - just pay post.

*2 unit rack panel (aluminium) – has milled holes (all same size) for connectors. Attached are 12 BNC connectors and 10 TRS inputs. $10

*Visonix Ghost transducer – I’ve built my own plate reverb using one of these and a contact pickup. Great for this application. This one is brand new and unused. $20 SOLD

*4 sticks of 512mb RAM for Imac computers - $15 for all of them

*2 x 3RU front panels (black) 19" Altronics rack enclosure - untouched/no marks. They have been wrapped in plastic when stored.
‪http://www.altronics.com.au/index.asp?a ... m&id=H5033
$15 each

*2 x 500 series blank front plates (black) - $10 each

*Vintage 70’s Korg Tuner model WT-10A. Cool tuner with funky look. All working, missing battery cover on back.
‪http://www.korguksupport.co.uk/page.cfm?pageid=480 – ok visual condition but works great. $20

*30 TS 1/4'” jacks with black plastic sleeve case (jacks only – no cable attached)
All 30 jacks for $15 SOLD

* 4 boxes of Radio Valves – lots of NOS tubes in original packaging and some used. Let me know if you need a particular tube and I’ll take a look and see if it’s in there.

*Multicore – 30m snake – 24 mic inputs and 4 returns. Newish condition. All works great.

* Mnats 1176 REV H - nice clean solid DIY build. Has Modutec VU and all knobs and switches are like original 1176. Alignment and power was finished by Rob Squire - $600 SOLD

* Neumann clone EQ W492 stereo pair - Nicely built with great front plates and Collet knobs. Tasty EQ! The power was finished by Rob Squire - $600

* Original Rode NT2 microphone. Actually a very nice sounding mic this one. All working perfectly. Great condition. Off the market for now

[Hybrid88]

Hi Ben,

I'd be interested in the SOS mags if they're still available?

[Ben M]

Sorry Richard. They went very quickly.
I'll let you know if anything changes. cheers Ben

[filjorgez]

Hi Ben,
is the 57 a Unidyne model?
Phil

[Hybrid88]

Sorry Richard. They went very quickly.
I'll let you know if anything changes. cheers Ben

No worries, thanks

[Ben M]

Hi Ben,
is the 57 a Unidyne model?
Phil

Hi Phil

No, just an old 57.
It's now Sold.

[filjorgez]

Hi Ben,
is the 57 a Unidyne model?
Phil

Hi Phil

No, just an old 57.
It's now Sold.

no problem Ben

[Ben M]

Ronnette Holland R572

Ronnette 2.jpg

Ronnette 1.jpg

[Ben M]

Nova rack - Sydney pickup only

[Ben M]

Added a few things;

Mnats 1176 REV H
Neumann clone EQ W492 stereo pair

[Ben M]

Neumann clone EQ is the one on the bottom of this pic.

Neumann W492 EQ.jpg

1176.jpg

[Ben M]

More things added + more pics

[Ben M]

Rode NT2

[Ben M]

Make me an offer on any of the remaining items.

[andygriffiths]

Is the 1176 still for sale?

[Ben M]

Is the 1176 still for sale?

Hey Andy, That one is gone. I have another but not selling it as yet. Will let you know if you like.
cheers

[Drumstruck]

PM sent

[mylesgm]

great price on the 1176, whomever got that really scored...