Hi all,
I have a few accessories for an electronic keyboard that are virtually brand new, unmarked etc - and no longer needed hereabouts.... I originally purchased them for an electronic mallet about 6 months ago and they were parked shortly afterwards (see that saga elsewhere).
$nnn ......
1/ Yamaha FC-7 expression pedal (x 2) like this:
http://au.yamaha.com/en/products/musica ... mode=model
$nn .....
2/ Roland RPU-3 (sustain/sos/mute) like this:
http://www.roland.com/products/en/RPU-3/
thankya fer loookin'
- It is currently Thu Jul 30, 2026 6:35 pm • All times are UTC + 10 hours [ DST ]
SOLD (KB accessories)
Moderators: rick, Mark Bassett
4 posts
• Page 1 of 1
SOLD (KB accessories)
Last edited by Drumstruck on Mon Aug 13, 2012 9:18 am, edited 3 times in total.
Ian Dare
- Drumstruck
- Valued Contributor

- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: KB accessories (pedals/stand)
Hi Ian,
Just trying to verify that the Roland RPU-3 sus pedal will work with my Kurzweil K2600 (at least just the sustain part, which is really all I need), I'm keen to take it. They look nice and weighty - I am forever chasing my existing single pedal around under my keyboard as it moves around (actually, I think that's an old roland one anyway). The Kurz has around 6 footswitch and pedal inserts at the rear, though I doubt the sos/mute things would work, but then again the Kurz is so configurable with its control inputs via footswitches maybe I won't be surprised to find I can get those ones working.... I'm just out of Canberra, which part of Oz is the pedal at?
Steve
Just trying to verify that the Roland RPU-3 sus pedal will work with my Kurzweil K2600 (at least just the sustain part, which is really all I need), I'm keen to take it. They look nice and weighty - I am forever chasing my existing single pedal around under my keyboard as it moves around (actually, I think that's an old roland one anyway). The Kurz has around 6 footswitch and pedal inserts at the rear, though I doubt the sos/mute things would work, but then again the Kurz is so configurable with its control inputs via footswitches maybe I won't be surprised to find I can get those ones working.... I'm just out of Canberra, which part of Oz is the pedal at?
Steve
Steve Lindsay
- SteveL
- Regular Contributor

- Posts: 329
- Joined: Thu Sep 13, 2007 12:59 pm
- Location: Southern Tablelands NSW
Re: KB accessories (pedals/stand)
Hi Steve,
These are a nice heavy feeling pedal and stay in place - they seem to work as a simple switch with TRS plug for each pedal, so I expect they'd work with any kb. I used them briefly with an electronic mallet and they did the sus/sos/etc function... and also tried them on an electronic drum module where they worked as an up/down switch for patch selection.
I'm near Culburra - about 2.5hrs drive for you - probably about $20 to courier them to you.
cheers
These are a nice heavy feeling pedal and stay in place - they seem to work as a simple switch with TRS plug for each pedal, so I expect they'd work with any kb. I used them briefly with an electronic mallet and they did the sus/sos/etc function... and also tried them on an electronic drum module where they worked as an up/down switch for patch selection.
I'm near Culburra - about 2.5hrs drive for you - probably about $20 to courier them to you.
cheers
Ian Dare
- Drumstruck
- Valued Contributor

- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
4 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 6 guests