- It is currently Fri Jul 31, 2026 5:39 am • All times are UTC + 10 hours [ DST ]
WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ-1NV
Moderators: rick, Mark Bassett
13 posts
• Page 1 of 1
WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ-1NV
Hi All, I am looking for an EQ / Tone Control to go with my Empirical Labs EL9 to be used for tracking.. It must shine on bass.. I want something that can do what plugs can't. I am looking for a character type box that can bring some vibe to whatever I pass through it. The Chandler Germanium Tone Control sounds like the most fun I can find but have not used it. Any decent parametric EQ would be considered though. Hit me up if you have something you want to sell that you think I may be interested in.
- Mixed_Messages
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
The ADM eqs in this listing are worth a look, stepped switches for recall, inductor eq with transformers, lots of frequencies and plenty of 70s tone. I've had 2 or 3 pairs of these and they're excellent for a wide range of scenarios and are way cheaper than a chandler unit...
viewtopic.php?f=2&t=7347
viewtopic.php?f=2&t=7347
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
Thanks Miles.. It looks like they are sold though... 

- Mixed_Messages
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
If you're looking for some ADM 1540 EQ's send me a PM.
Here's some info:
ADM 1540 Equaliser.
These modules were manufactured in 1980 by Audio Design Manufacturing.
They are 4 band inductors based reciprocal equalisers with precision switched gain settings and frequency selection.
11 position Grayhill dual concentric switches provide 2, 4, 6, 9 & 12db of boost or cut at the following frequencies.
LF: 40, 80, 100 Hz Shelving
ML: 200, 350, 560, 900 Hz Peak & Dip
MH: 1.5, 2.5, 4.3, 7.2 kHz Peak & Dip
HF: 10, 12.5, 15 kHz Shelving
Require a dual rail 20 volt supply. Rob or Joe Malone (JLM) can rack them up for you or can sell you the power supply to suit if you're into DIY.
Edge connector and schematics included.
These are nice EQ's from the 80's, engraved face plates, high quality components and built like a tank. Think API or Quad 8.
Here's a pic.
Here's some info:
ADM 1540 Equaliser.
These modules were manufactured in 1980 by Audio Design Manufacturing.
They are 4 band inductors based reciprocal equalisers with precision switched gain settings and frequency selection.
11 position Grayhill dual concentric switches provide 2, 4, 6, 9 & 12db of boost or cut at the following frequencies.
LF: 40, 80, 100 Hz Shelving
ML: 200, 350, 560, 900 Hz Peak & Dip
MH: 1.5, 2.5, 4.3, 7.2 kHz Peak & Dip
HF: 10, 12.5, 15 kHz Shelving
Require a dual rail 20 volt supply. Rob or Joe Malone (JLM) can rack them up for you or can sell you the power supply to suit if you're into DIY.
Edge connector and schematics included.
These are nice EQ's from the 80's, engraved face plates, high quality components and built like a tank. Think API or Quad 8.
Here's a pic.
You do not have the required permissions to view the files attached to this post.
Greg Hooke
- Hookemeister
- Regular Contributor

- Posts: 361
- Joined: Sat Jul 10, 2010 8:47 pm
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
Thanks Greg, is the ADM like a 500 series module ? I would rather a 19" rack mount style unit but will wait and see what else comes along before ruling it out..
That Clariphonic does look nice but I think it is more of a mastering type tool rather than a single channel tracking EQ like I want/need..
Cheers,
Jeremy
That Clariphonic does look nice but I think it is more of a mastering type tool rather than a single channel tracking EQ like I want/need..
Cheers,
Jeremy
- Mixed_Messages
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
Hi Jeremy,
The ADM's are a modular unit but not compatible with the 500 series.
2 of then can be fitted in a 1 RU rack case. I think Rob Squire or Joe Malone has racked them up for clients.
Thanks
The ADM's are a modular unit but not compatible with the 500 series.
2 of then can be fitted in a 1 RU rack case. I think Rob Squire or Joe Malone has racked them up for clients.
Thanks
Greg Hooke
- Hookemeister
- Regular Contributor

- Posts: 361
- Joined: Sat Jul 10, 2010 8:47 pm
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
Hi Jeremy,
budget constraints? I have something but suspect it may be a bit too pricey and is dual channel ....
budget constraints? I have something but suspect it may be a bit too pricey and is dual channel ....
Ian Dare
- Drumstruck
- Valued Contributor

- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
+1 on your budget.
I too might have something but it might be overkill.....think tube eq yum yum...
I too might have something but it might be overkill.....think tube eq yum yum...
Dale Smith
-

HA_DA_JA - Valued Contributor

- Posts: 1162
- Joined: Thu Mar 09, 2006 12:47 pm
- Location: Brisbane
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
Fess up Dale - you know I'm a sucker when it comes to tube eqs...
(Caveat: I have no cash and have been threatened with divorce if I buy any more toys... although I seem to have gotten away with the Avalon I just bought).
(Caveat: I have no cash and have been threatened with divorce if I buy any more toys... although I seem to have gotten away with the Avalon I just bought).
Manning Bartlett, Studio Laughing Duck, Glenorie NSW
http://www.studiolaughingduck.com
http://www.studiolaughingduck.com
-

Manning - Valued Contributor

- Posts: 1102
- Joined: Wed Sep 28, 2011 6:47 pm
- Location: Glenorie NSW
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
I don't really have a budget in mind.. I just want to see what people have and take it from there.. A Pultec clone could be nice.. I haven't used any decent hardware eqs.. I just have to rely on what I read in various forums as to whether it would be what I want.. Something like a Speck seems to be a good entry level piece but doesn't seem to add much more than I can get with a plugin.. I want something that inspires me when playing my bass/ guitar or whatever I am tracking.. Something that helps bring out different flavours from the same source.. If I am tracking lead and backing vox, a way of making them sound different beyond just using a different mic.. Clinical/ surgical type stuff isn't what I am after. That is the one thing computers do OK. I hope I am not sounding unqualified or like a newbie..
- Mixed_Messages
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
Sent through a PM about some transformer in/out solid state EQ's.
Alistair McLean
- Alistair
- Frequent Contributor

- Posts: 634
- Joined: Fri Jul 16, 2010 11:35 am
- Location: Melbourne
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
I have a racked pair of Neve 51 / V series EQs available.
All transformer in and out, four sweepable bands.
All transformer in and out, four sweepable bands.
-

rob - TRM Endorsed

- Posts: 1011
- Joined: Tue May 10, 2005 9:16 pm
- Location: Adelaide
Re: WTB: Character EQ for tracking - EQ Chandler Germ, GR EQ
The Neves are great EQ's - I carry a pair into every tracking session and the assistants and other engineers jaws hit the floor when they hear what you can do with them on kick - and toms - also killer on vocals, acoustics, brass, strings, overheads - you name it.
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
13 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 8 guests