ADM 1540 Equaliser Modules

[Hookemeister]

ADM 1540 Equaliser Modules. $170 each

These modules were manufactured in 1980 by Audio Design Manufacturing.

They are 4 band inductors based reciprocal equalisers with precision switched gain settings and frequency selection.

11 position Grayhill dual concentric switches provide 2, 4, 6, 9 & 12db of boost or cut at the following frequencies.

LF: 40, 80, 100 Hz Shelving

ML: 200, 350, 560, 900 Hz Peak & Dip

MH: 1.5, 2.5, 4.3, 7.2 kHz Peak & Dip

HF: 10, 12.5, 15 kHz Shelving

Require a dual rail 20 volt supply. Rob or Joe Malone (JLM) can rack them up for you or can sell you the power supply to suit if you're into DIY.

Edge connector and schematics included. Mounting frame to hold up to 4 modules supplied if you buy 2 or more modules.

These are nice EQ's from the 80's, engraved face plates, high quality components and built like a tank. Think API or Quad 8.

$170 each

[rick]

Gentlemen you want these

[mylesgm]

and cheap too. You can easily add a tx output if these don't have that option onboard already. Any 600:600 tx will do and you can remove the capacitor output very easily (four solder points).

I've racked several of these over the years, I like them and the switches make recall easy...

[ishumusic]

Hi Greg

How many modules are available?

Thanks,
Gary.

[Gian]

PM sent requesting 2

[Hookemeister]

How many modules are available?

6 have gone.

I'll have to check and let you know how many are left.... tomorrow.

Thanks

[waitup]

Any left there Greg?

[Hookemeister]

Hi Nick,

you'll have to give me a day or 2. I'm out of town at the moment and will need to go thru the list of who's got what... and what's left.

Should be able to let you know on Thursday.

Thanks

Greg

[waitup]

No problem!

[Hookemeister]

Hi Nick,

OK I've got 2 set aside for you.

I'll be coming down to Sydney at the end of May so if you're prepared to wait, I'll drop them in and save you some postage... plus we'll get to meet. That's an added bonus for me as I always seem to miss the TR BBQ's.

So how does that sound?

If you're in a hurry to get them I can post them, should be around $23 fully insured

Anyhow let me know which way you want to go.

Thanks

Greg

[waitup]

Hey Greg,

That sounds great. Just let me know when you're coming down. My email is nick@nfaudio.com

[Hookemeister]

OK, I think everybody has received their EQ's except for Nick & Peat and I'll personally deliver those this week.

That leaves 4 available if anyone else is interested.

Thanks

[TimC]

PM sent.

[Drumstruck]

and another PM

[LachlanM]

Hi Greg,

Any Eq modules left?

Cheers,

Lachlan.

[Hookemeister]

Any Eq modules left?

PM'd

[ishumusic]

Hi Greg

I seem to be experiencing some difficulties with my PM's. did you get my reply? If not please email me via gd at ishumusic dot com

Cheers
Gary

[Wiz]

PM'd

[Hookemeister]

I'm holding 2 of these for somebody but I'm not sure who... maybe it's you Peter.

I'll PM you.

If Peter doesn't want them then they're available.

Thanks

[Wiz]

I want em...


Edge connector and rack and schematic please...

I am in Bundaberg 4670

You can call me on 07 4152 6890 if you want

Thanks

Peter

[Wiz]

I want em...


Edge connector and rack and schematic please...

I am in Bundaberg 4670

You can call me on 07 4152 6890 if you want

Thanks

Peter

Actually, I will have to pass.

My eyes are bigger than my wallet atm.


Peter