2x Rode NT2A - Matched Pair (in original cardboard box with manual, mic case & ring mount)
Bought new, Only used half a dozen times, Very Good Condition.
Wanting to sell together.
$800/pair
2x Rode NT5 - Matched Pair (+ instruction guide, plastic carry case, stereo bar, mic clip & pop filter)
Bought new, Only used half a dozen times, Very Good Condition.
Selling as a stereo kit.
$500/pair
1x Rode NT1 - Original Beige Model (+ shock mount)
Bought second hand a number of years ago, Good Working Condition.
I've just peeled the original music store's barcode sticker off the mic so now it's left with sticky residue...
$250
(also have a second mic in very good condition if there's an interest in that too)
2x K&M Short Boom Stand
Bought new, Only used half a dozen times.
SOLD
4x K&M Tall Boom Stand
Bought new, Only used possibly a dozen times.
SOLD
TL Audio 5052 Tube PreAmp/EQ/Compressor/Limiter 3RU
Bought new for a ridiculous amount of money, Very Good Working Condition.
$1,600
Live Record Rack including:
2x Focusrite Octopre - Original Model 8ch Transparent Class A Preamp (+ AES/SPDIF/ADAT ADC Card installed)
(1 Bought new in Very Good Condition, 1 Bought second hand on Ebay from the UK in Very Good Condition)
1x Spare Focusrite Octopre ADAT Only ADC Card
4x 1RU Rack Strips with white laminate surface to use with whiteboard markers (Bought new)
1x Gator 6RU Plastic Case
2x AES 9pin DSub to 4 male XLR breakout cables
All works great for a 16 channel live record rig, used the AES outputs into Lynx Aurora 16 with no problems.
Including the extra ADAT ADC Card which would take it up to 24ch with an additional octopre unit.
$1,400 for everything already racked up
Broadcast Pro Audio Passive Link ReAmper
Bought new, Used once, Very Good Condition.
Male & Female XLR Inputs, Volume & Tone Control.
$180
Indigo Computer Workstation/Desk
Bought new from Turramurra Music, Designed and Manufactured by Steve in the Studio Department.
Black Finish, Very Good Condition.
2x 6RU Racks either side of the desk. Wide enough space for dual 23" LCD Monitors.
No rack strip under the desk/racks but if you wanted to install yourself it would be 12RU per side if I remember correctly.
SOLD
B!@#$%^&* 2x31 Band Graphic EQ 2RU
Bought new, Very Average Condition.
Some of the faders caps have snapped off over the years however you can still move the thing up and down.
$70
B!@#$%^&* 2ch Compressor/Gate 1RU
Bought new, Good Condition.
$70
B!@#$%^&* MultiEffect Unit 1RU
Bought new, Good Condition.
$70
B!@#$%^&* 48 point TRS Patchbay 1RU (or is it only TS?!?!)
Bought new, Average Condition.
$70
Studer B67 Tape Machine
Bought at the ABC auctions a few years ago.
Average Condition, I haven't used it at all, If I remember correctly when it was bought the left channel doesn't work and the right channel is noisy.
SOLD
Hammond L100 Series
Average Condition, One of the keys has snapped off, It also needs a good service.
SOLD
Cheers,
Nath
- It is currently Wed Jul 29, 2026 3:57 pm • All times are UTC + 10 hours [ DST ]
FS: Mics, PreAmps
Moderators: rick, Mark Bassett
11 posts
• Page 1 of 1
FS: Mics, PreAmps
Last edited by NathS101 on Sat May 16, 2015 1:17 am, edited 1 time in total.
- NathS101
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Hey Nath, I'll take 2 tall K&M stands if your willing to post
Andy Griffiths- onthebeatstudios & Andy's custom cables
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
- andygriffiths
- Regular Contributor

- Posts: 300
- Joined: Fri Apr 13, 2012 11:30 am
- Location: Brisbane
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Or I'll take all the stands if you don't want to post...
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Hey Andy, honestly I don't think it would be worth the expense to send them up... I'm sure you could find some stands up there for the same price without paying extra for postage. Otherwise if you still want them I can find out a price...?
Myles, they've been sitting in my car for a few days. How do you want to get them?
Nath
Myles, they've been sitting in my car for a few days. How do you want to get them?
Nath
- NathS101
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Nath, no worries, Myles they are all yours mate
Andy Griffiths- onthebeatstudios & Andy's custom cables
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
http://www.onthebeatstudios.com
http://www.andyscustomcables.com
- andygriffiths
- Regular Contributor

- Posts: 300
- Joined: Fri Apr 13, 2012 11:30 am
- Location: Brisbane
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
pm'd Nath.
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Nath?
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Disregard everyone, I didn't understand location... Doesn't everyone live in Melbourne?
Myles Mumford
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
Producer/Composer/Engineer/Sound Artist
Making records in sunny Melbourne
www.mylesmumford.com
-

mylesgm - Valued Contributor

- Posts: 1964
- Joined: Mon Feb 09, 2009 6:48 pm
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
Ha sorry I couldn't help you out Myles!
Anyone else keen for anything before it goes to ebay? (or the tip...)
Anyone else keen for anything before it goes to ebay? (or the tip...)
- NathS101
Re: FS: Mics, Stands, PreAmps, Workstation, Studer, Hammond
I'll take 2 K&M Tall mic stands if you still have them.
I'm in Castle Hill, so I am close and can pick up easily.
I'm in Castle Hill, so I am close and can pick up easily.
Gian Parodi
It's the first watt that counts
It's the first watt that counts
- Gian
- Frequent Contributor

- Posts: 516
- Joined: Tue Nov 18, 2008 9:38 pm
- Location: Sydney, Australia
11 posts
• Page 1 of 1
Return to For Sale / For Hire / Gear Wanted
Who is online
Users browsing this forum: No registered users and 18 guests