I was thinking this evening, I wonder if there were any Australian tube mic manufacturers back around the time desks and tape decks were being manufactured locally under the AWA / Rola / Optro / etc brands?
I know Zephyr made some well regarded ribbons but I don't recall ever hearing tell of locally produced condensers / tube mics – I guess because the costs of manufacturing may have been prohibitive with too small a client base?
Anyway, just a thought...
- It is currently Wed Jul 29, 2026 5:05 pm • All times are UTC + 10 hours [ DST ]
Older Australian Mic manufacturers?
Moderators: rick, Mark Bassett
8 posts
• Page 1 of 1
Older Australian Mic manufacturers?
Dave Carter
http://www.twitter.com/davecarter
http://www.twitter.com/davecarter
- Text_Edifice
- Valued Contributor

- Posts: 1031
- Joined: Sun Nov 27, 2005 12:00 pm
- Location: Wellington
Re: Older Australian Mic manufacturers?
There was a company called ACE Electronics in Marrickville that made valve amplifiers (I had one in the early 70s that looked and sounded much like a marshall head / quad box). I think they made mics also but I don't have any further leads.......
http://www.jedistar.com/jedistar_amp_dating_s2.htm
http://www.jedistar.com/jedistar_amp_dating_s2.htm
Ian Dare
- Drumstruck
- Valued Contributor

- Posts: 1589
- Joined: Fri Sep 17, 2010 12:37 pm
- Location: NSW South Coast
Re: Older Australian Mic manufacturers?
AWA used to make RCA 44's under licence and badge them AWA, but I don't recall them ever making a valve mic. Back in those days ribbon mics were the preferred way to go fo broadcasting, so there probably wasn't a huge demand.
Bob Charman - Stockport Sound, SA
The Road Goes On Forever and the Party Never Ends..........
The Road Goes On Forever and the Party Never Ends..........
-

stosostu - Regular Contributor

- Posts: 458
- Joined: Fri Jul 23, 2010 3:17 pm
- Location: Clare and Gilbert Valleys, South Australia
Re: Older Australian Mic manufacturers?
Text_Edifice wrote:I was thinking this evening, I wonder if there were any Australian tube mic manufacturers back around the time desks and tape decks were being manufactured locally under the AWA / Rola / Optro / etc brands?
I know Zephyr made some well regarded ribbons but I don't recall ever hearing tell of locally produced condensers / tube mics – I guess because the costs of manufacturing may have been prohibitive with too small a client base?
Anyway, just a thought...
You got me thinking about Optronics (Aust manufactured 2" tape machine) which led to this pretty cool website.
http://www.oneillassociates.com.au/~pon ... udio.shtml
Zephyr is in there also Byer
http://www.oneillassociates.com.au/~pon ... 46-D.shtml
cheers
Terry Demol
T & L Technical P/L
Audio Design & Service
T & L Technical P/L
Audio Design & Service
- zenelectro
- Registered User

- Posts: 59
- Joined: Mon Jul 19, 2010 1:38 am
- Location: Sydney
Re: Older Australian Mic manufacturers?
I'm using one of those Byer green valve mic pre's - 110 DB of gain !! - it is such a great valve mic pre.
Restored by Rob with 48volts and pad - cause 110 db is a bit too much gain... Neve eat your heart out!
They were solely used in the 1956 Olympics by all journalists - back in the old protectionist days.
So every journalist from every country in the world were forced to use them. I was given a great old photograph of a stadium stand with hundreds of journalists sitting in front of these green tape machines.
Also have a pair of Rola 77 Mk III's - again amazing pre's (and amazing guitar amps too)
Dont know of any mic's but the Zephyr's
Restored by Rob with 48volts and pad - cause 110 db is a bit too much gain... Neve eat your heart out!
They were solely used in the 1956 Olympics by all journalists - back in the old protectionist days.
So every journalist from every country in the world were forced to use them. I was given a great old photograph of a stadium stand with hundreds of journalists sitting in front of these green tape machines.
Also have a pair of Rola 77 Mk III's - again amazing pre's (and amazing guitar amps too)
Dont know of any mic's but the Zephyr's
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: Older Australian Mic manufacturers?
If anyone's interested in the Byer pre's from the 1956 Olympics - here is a pic online
http://www.oneillassociates.com.au/~pon ... pics.shtml
http://www.oneillassociates.com.au/~pon ... pics.shtml
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
Re: Older Australian Mic manufacturers?
So what's the difference between the Olympic Pres and the 77 mk III?
Dave Carter
http://www.twitter.com/davecarter
http://www.twitter.com/davecarter
- Text_Edifice
- Valued Contributor

- Posts: 1031
- Joined: Sun Nov 27, 2005 12:00 pm
- Location: Wellington
Re: Older Australian Mic manufacturers?
Rob would best tell the design difference (as he restored all 3 of my pre's) - but I know the Rola 77 and 66 don't have anywhere near 110db of gain.
They are all amazing pre's - I sometimes use my matched pair of 77 Mk III's as makeup gain on my passive mix bus - It sounds astonishingly huge to mix through this pair of beasts.
They are all amazing pre's - I sometimes use my matched pair of 77 Mk III's as makeup gain on my passive mix bus - It sounds astonishingly huge to mix through this pair of beasts.
C h r i z t o w n o
- The Tasmanian
- Valued Contributor

- Posts: 1901
- Joined: Thu Nov 27, 2008 8:04 am
- Location: Deep in the woods....
8 posts
• Page 1 of 1
Return to The Turtlerock Forum
Who is online
Users browsing this forum: No registered users and 14 guests