Older Australian Mic manufacturers?

An audio community like no other.

Moderators: rick, Mark Bassett

Older Australian Mic manufacturers?

Postby Text_Edifice » Tue Jan 24, 2012 9:43 pm

I was thinking this evening, I wonder if there were any Australian tube mic manufacturers back around the time desks and tape decks were being manufactured locally under the AWA / Rola / Optro / etc brands?

I know Zephyr made some well regarded ribbons but I don't recall ever hearing tell of locally produced condensers / tube mics – I guess because the costs of manufacturing may have been prohibitive with too small a client base?

Anyway, just a thought...
Dave Carter

http://www.twitter.com/davecarter
Text_Edifice
Valued Contributor
Valued Contributor
 
Posts: 1031
Joined: Sun Nov 27, 2005 12:00 pm
Location: Wellington

Re: Older Australian Mic manufacturers?

Postby Drumstruck » Wed Jan 25, 2012 8:28 am

There was a company called ACE Electronics in Marrickville that made valve amplifiers (I had one in the early 70s that looked and sounded much like a marshall head / quad box). I think they made mics also but I don't have any further leads.......

http://www.jedistar.com/jedistar_amp_dating_s2.htm
Ian Dare
Drumstruck
Valued Contributor
Valued Contributor
 
Posts: 1589
Joined: Fri Sep 17, 2010 12:37 pm
Location: NSW South Coast

Re: Older Australian Mic manufacturers?

Postby stosostu » Wed Jan 25, 2012 10:04 am

AWA used to make RCA 44's under licence and badge them AWA, but I don't recall them ever making a valve mic. Back in those days ribbon mics were the preferred way to go fo broadcasting, so there probably wasn't a huge demand.
Bob Charman - Stockport Sound, SA
The Road Goes On Forever and the Party Never Ends..........
User avatar
stosostu
Regular Contributor
Regular Contributor
 
Posts: 458
Joined: Fri Jul 23, 2010 3:17 pm
Location: Clare and Gilbert Valleys, South Australia

Re: Older Australian Mic manufacturers?

Postby zenelectro » Wed Feb 01, 2012 2:39 pm

Text_Edifice wrote:I was thinking this evening, I wonder if there were any Australian tube mic manufacturers back around the time desks and tape decks were being manufactured locally under the AWA / Rola / Optro / etc brands?

I know Zephyr made some well regarded ribbons but I don't recall ever hearing tell of locally produced condensers / tube mics – I guess because the costs of manufacturing may have been prohibitive with too small a client base?

Anyway, just a thought...


You got me thinking about Optronics (Aust manufactured 2" tape machine) which led to this pretty cool website.

http://www.oneillassociates.com.au/~pon ... udio.shtml

Zephyr is in there also Byer

http://www.oneillassociates.com.au/~pon ... 46-D.shtml

cheers
Terry Demol
T & L Technical P/L
Audio Design & Service
zenelectro
Registered User
Registered User
 
Posts: 59
Joined: Mon Jul 19, 2010 1:38 am
Location: Sydney

Re: Older Australian Mic manufacturers?

Postby The Tasmanian » Wed Feb 01, 2012 7:05 pm

I'm using one of those Byer green valve mic pre's - 110 DB of gain !! - it is such a great valve mic pre.
Restored by Rob with 48volts and pad - cause 110 db is a bit too much gain... Neve eat your heart out!
They were solely used in the 1956 Olympics by all journalists - back in the old protectionist days.
So every journalist from every country in the world were forced to use them. I was given a great old photograph of a stadium stand with hundreds of journalists sitting in front of these green tape machines.
Also have a pair of Rola 77 Mk III's - again amazing pre's (and amazing guitar amps too)
Dont know of any mic's but the Zephyr's
C h r i z t o w n o
The Tasmanian
Valued Contributor
Valued Contributor
 
Posts: 1901
Joined: Thu Nov 27, 2008 8:04 am
Location: Deep in the woods....

Re: Older Australian Mic manufacturers?

Postby The Tasmanian » Thu Feb 02, 2012 1:09 pm

If anyone's interested in the Byer pre's from the 1956 Olympics - here is a pic online
http://www.oneillassociates.com.au/~pon ... pics.shtml
C h r i z t o w n o
The Tasmanian
Valued Contributor
Valued Contributor
 
Posts: 1901
Joined: Thu Nov 27, 2008 8:04 am
Location: Deep in the woods....

Re: Older Australian Mic manufacturers?

Postby Text_Edifice » Thu Feb 02, 2012 2:07 pm

So what's the difference between the Olympic Pres and the 77 mk III?
Dave Carter

http://www.twitter.com/davecarter
Text_Edifice
Valued Contributor
Valued Contributor
 
Posts: 1031
Joined: Sun Nov 27, 2005 12:00 pm
Location: Wellington

Re: Older Australian Mic manufacturers?

Postby The Tasmanian » Thu Feb 02, 2012 4:05 pm

Rob would best tell the design difference (as he restored all 3 of my pre's) - but I know the Rola 77 and 66 don't have anywhere near 110db of gain.
They are all amazing pre's - I sometimes use my matched pair of 77 Mk III's as makeup gain on my passive mix bus - It sounds astonishingly huge to mix through this pair of beasts.
C h r i z t o w n o
The Tasmanian
Valued Contributor
Valued Contributor
 
Posts: 1901
Joined: Thu Nov 27, 2008 8:04 am
Location: Deep in the woods....


Return to The Turtlerock Forum

Who is online

Users browsing this forum: No registered users and 15 guests